Details

---

BUY TLP250 SOP https://www.utsource.net/itm/p/11553978.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Forward Voltage	VIF	IF = 10 mA		1.2	1.6	V
Input Current	IF	VIF = 1.4 V	5	10	15	mA
Output Collector-Emitter Saturation Voltage	VCE(sat)	IC = 150 mA, VOUT = 5 V	0.2	0.3	0.4	V
Output Leakage Current	ICEO	VCE = 30 V, IF = 0		100	500	μA
Propagation Delay Time	tpd	VCC = 5 V, IF = 10 mA, IC = 150 mA	1	2	3	μs
Rise Time	tr	VCC = 5 V, IF = 10 mA, IC = 150 mA	0.2	0.5	0.8	μs
Fall Time	tf	VCC = 5 V, IF = 10 mA, IC = 150 mA	0.2	0.5	0.8	μs

Instructions for TLP250 SOP

1. Power Supply Requirements:

   • Ensure the supply voltage (V_CC) is within the specified range of 4.5 V to 20 V.

2. Input Signal:

   • Apply the input signal across pins 1 and 2.
   • The forward current (I_F) should be set between 5 mA and 15 mA for optimal performance.

3. Output Configuration:

   • Connect the output load between the collector (pin 4) and emitter (pin 3).
   • Ensure the output current (I_C) does not exceed 150 mA to avoid damage.

4. Handling Static Electricity:

   • Handle the device with care to prevent damage from static electricity.
   • Use proper anti-static measures when soldering or handling.

5. Mounting:

   • Ensure that the device is securely mounted on the PCB to maintain electrical connections.
   • Follow the manufacturer’s guidelines for soldering temperature and time.

6. Storage:

   • Store in a dry environment away from direct sunlight and extreme temperatures.
   • Keep in original packaging until ready for use to protect against moisture and static.

7. Testing:

   • Before integrating into a circuit, test the device using the propagation delay time and leakage current parameters to ensure it meets specifications.

(For reference only)