MBRS190T3G B19 ON 1A90V

MBRS190T3G B19 ON 1A90V

Category: Transistors

Specifications
SKU
11554541
Details

BUY MBRS190T3G B19 ON 1A90V https://www.utsource.net/itm/p/11554541.html

Parameter Symbol Min Typ Max Unit Notes
Average Rectified Current (Non-repetitive) IF(AV) - - 1.0 A -
Peak Repetitive Reverse Voltage VRRM - - 90 V -
Peak Forward Surge Current (Non-repetitive, 8.3 ms sine-wave) IFSM - - 30 A -
Forward Voltage at IF = 1.0 A VF 0.75 - 1.2 V -
Reverse Leakage Current at VR = 90 V, TJ = 25掳C IR - - 100 渭A -
Reverse Recovery Time trr - - 35 ns -
Operating Junction Temperature Range TJ -65 - 175 掳C -
Storage Temperature Range TSTG -65 - 150 掳C -

Instructions for Use:

  1. Mounting:

    • Ensure proper heat dissipation by mounting the diode on a suitable heatsink if operating near maximum current.
    • Use appropriate mechanical securing methods to prevent mechanical stress on the leads.
  2. Electrical Connections:

    • Connect the diode in the forward direction (anode to positive, cathode to negative) to ensure correct operation.
    • Ensure that the peak reverse voltage does not exceed 90V to avoid breakdown.
  3. Thermal Management:

    • Monitor the junction temperature to ensure it stays within the operating range (-65掳C to 175掳C).
    • Use thermal paste or thermal interface materials to improve heat transfer from the diode to the heatsink.
  4. Surge Current Handling:

    • The diode can handle a peak forward surge current of up to 30A for non-repetitive pulses (8.3 ms sine-wave). Ensure that surge conditions do not exceed this limit.
  5. Storage:

    • Store the diode in a dry environment within the temperature range of -65掳C to 150掳C to maintain its performance characteristics.
  6. Handling:

    • Handle the diode with care to avoid damage to the leads and body.
    • Use ESD-safe tools and practices to prevent electrostatic discharge damage.
  7. Testing:

    • When testing the diode, use a multimeter or a dedicated diode tester to check the forward and reverse characteristics.
    • Ensure that the test currents and voltages do not exceed the specified limits to avoid damaging the diode.
(For reference only)

View more about MBRS190T3G B19 ON 1A90V on main site