Details

---

BUY TLP181GB SOP4 https://www.utsource.net/itm/p/11554556.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Forward Voltage	VF	-	1.2	1.6	V	IF = 10 mA
Reverse Voltage	VRRM	-	-	5	V
Continuous Forward Current	IF	-	-	30	mA	TA = 25掳C
Peak Forward Current	IF(surge)	-	-	100	mA	tp = 1 s
Output Collector-Emitter Saturation Voltage	VCE(sat)	-	0.2	0.5	V	IC = 10 mA, VCE = 5 V
Output Collector Current	IC	-	-	10	mA	VCE = 5 V
Isolation Voltage	VISO	-	-	5000	VRMS	Test Condition: 1 minute, 50/60 Hz
Operating Temperature Range	TOP	-40	-	110	掳C
Storage Temperature Range	TSTG	-40	-	125	掳C

Instructions for Use:

1. Handling Precautions:

   • Handle with care to avoid mechanical damage.
   • Avoid exposure to high temperatures and humidity.

2. Mounting:

   • Ensure proper alignment of the component during soldering.
   • Use a soldering iron with a temperature not exceeding 300掳C.
   • Soldering time should not exceed 10 seconds per terminal.

3. Electrical Connections:

   • Connect the forward voltage (V_F) pin to the positive supply.
   • Connect the reverse voltage (V_RRM) pin to the negative supply.
   • Ensure the output collector and emitter pins are correctly connected to the load circuit.

4. Thermal Management:

   • Ensure adequate heat dissipation if operating at high currents or temperatures.
   • Consider using a heatsink if necessary.

5. Testing:

   • Test the device under specified conditions to ensure it meets the required performance parameters.
   • Use appropriate test equipment and follow safety guidelines.

6. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep in original packaging until ready for use to prevent static damage.

(For reference only)