Details

---

BUY FSFR1800 https://www.utsource.net/itm/p/11559021.html
IC SWIT PROG OVP OCP 9SIP

Parameter	Description	Value	Unit
Part Number	Full name of the component	FSFR1800	-
Type	Component type	Schottky Diode	-
Maximum Repetitive Peak Reverse Voltage (VRRM)	Maximum reverse voltage that can be applied continuously without breakdown	18	V
Maximum Average Rectified Forward Current (IF(AV))	Maximum forward current that can flow through the diode continuously at a specified temperature	0.5	A
Maximum RMS Current (IRMS)	Maximum root mean square current that can flow through the diode continuously at a specified temperature	0.35	A
Maximum Peak Surge Current (IFSM)	Maximum peak current that can flow through the diode for a short duration	20	A
Forward Voltage Drop (VF)	Voltage drop across the diode when conducting forward current at a specified level	0.45	V
Reverse Recovery Time (trr)	Time it takes for the diode to switch from on to off state	35	ns
Operating Junction Temperature Range (TJ)	Range of temperatures over which the diode is designed to operate reliably	-65 to +150	°C
Storage Temperature Range (TSTG)	Range of temperatures over which the diode can be stored without damage	-65 to +150	°C
Package Type	Physical package of the diode	SOD-323	-

Instructions for Use:

1. Handling Precautions:

   • Handle the FSFR1800 with care to avoid damage to the leads or body.
   • Use appropriate ESD (Electrostatic Discharge) protection measures to prevent damage.

2. Mounting:

   • Ensure proper alignment of the diode during mounting to avoid mechanical stress.
   • Soldering temperature should not exceed 260°C for more than 10 seconds.
   • Allow the diode to cool naturally after soldering.

3. Electrical Connections:

   • Connect the anode (A) and cathode (K) terminals correctly to avoid reverse polarity.
   • Ensure that the maximum ratings for voltage, current, and temperature are not exceeded.

4. Thermal Management:

   • Provide adequate heat sinking if the diode will be operating near its maximum current or temperature limits.
   • Ensure good thermal conductivity between the diode and any heat sink used.

5. Testing:

   • Use a multimeter or diode tester to verify the functionality of the diode before installation.
   • Test the diode under expected operating conditions to ensure it meets the required performance specifications.

6. Storage:

   • Store the diode in a dry, cool place away from direct sunlight.
   • Keep the diode in its original packaging until ready for use to protect against static and physical damage.

(For reference only)