Details

---

BUY KIA7915PI https://www.utsource.net/itm/p/11564867.html

Parameter	Description	Value
Input Voltage Range	Operating voltage range for the input	20V to 40V DC
Output Voltage	Regulated output voltage	15V DC (Fixed)
Output Current	Maximum continuous output current	1A
Line Regulation	Change in output voltage due to change in input voltage	卤0.1%
Load Regulation	Change in output voltage due to change in load current	卤0.1%
Ripple and Noise	Output ripple and noise voltage	30mV (p-p)
Efficiency	Power conversion efficiency	Up to 85%
Operating Temperature Range	Temperature range for reliable operation	-40掳C to +85掳C
Storage Temperature Range	Temperature range for storage	-65掳C to +150掳C
Thermal Shutdown	Protection against overheating	Activates at 150掳C (typical)
Short-Circuit Protection	Protection against short circuits on the output	Automatic recovery
Package Type	Physical package of the device	TO-220
Pin Configuration	Pin layout of the device	Pin 1: Input Pin 2: Ground Pin 3: Output

Instructions for Use

1. Power Supply Connection:

   • Connect the positive terminal of the power supply to Pin 1 (Input).
   • Connect the negative terminal of the power supply to Pin 2 (Ground).

2. Load Connection:

   • Connect the load between Pin 3 (Output) and Pin 2 (Ground).

3. Heat Dissipation:

   • Ensure adequate heat dissipation by mounting the KIA7915PI on a heatsink if the output current is close to the maximum rating.

4. Input Capacitor:

   • Place a 10渭F electrolytic capacitor between the input and ground pins to stabilize the input voltage.

5. Output Capacitor:

   • Place a 10渭F electrolytic capacitor between the output and ground pins to filter the output voltage and reduce ripple.

6. Protection:

   • The device includes thermal shutdown and short-circuit protection. If the device overheats or experiences a short circuit, it will automatically shut down and recover once the fault condition is removed.

7. Operating Environment:

   • Ensure that the operating temperature does not exceed the specified range to avoid damage to the device.

8. Storage:

   • Store the device in a dry environment within the specified storage temperature range to prevent degradation.

9. Handling:

   • Handle the device with care to avoid mechanical stress and electrostatic discharge (ESD) damage. Use proper ESD protection when handling the device.

(For reference only)