Details

---

BUY HY1920P 90A200V HY TO-220 https://www.utsource.net/itm/p/11565274.html

Parameter	Value	Unit
Part Number	HY1920P	-
Package	TO-220	-
Maximum Current	90	A
Maximum Voltage	200	V
Forward Voltage	2.0	V
Reverse Recovery Time	45	ns
Operating Temperature	-55 to 150	掳C
Storage Temperature	-65 to 150	掳C
Thermal Resistance (Case to Ambient)	1.5	掳C/W

Instructions:

1. Mounting:

   • Ensure the mounting surface is flat and clean.
   • Use a thermal compound to improve heat dissipation between the component and the heatsink.
   • Tighten the mounting screw to the recommended torque (typically 1.5 to 2.5 Nm).

2. Electrical Connections:

   • Connect the anode and cathode leads to the circuit according to the polarity markings on the component.
   • Ensure all connections are secure and free from shorts.

3. Thermal Management:

   • Adequate cooling is essential to prevent overheating. Use a heatsink with sufficient surface area and thermal conductivity.
   • Monitor the operating temperature to ensure it stays within the specified range (-55掳C to 150掳C).

4. Handling:

   • Handle the component with care to avoid mechanical damage.
   • Use proper ESD (Electrostatic Discharge) precautions to prevent damage from static electricity.

5. Storage:

   • Store the component in a dry, cool place away from direct sunlight.
   • Ensure the storage temperature remains within the specified range (-65掳C to 150掳C).

6. Testing:

   • Before installing the component, test its parameters using a multimeter or an appropriate testing device to ensure it meets the specifications.
   • Perform a visual inspection for any signs of damage or defects.

7. Soldering:

   • Use a controlled soldering process to avoid overheating the component.
   • Soldering temperature should not exceed 260掳C for more than 10 seconds.

8. Compliance:

   • Ensure that the component complies with all relevant safety and regulatory standards for your application.

(For reference only)