Details

---

BUY BTA24-600BWRG BTA24-600BW https://www.utsource.net/itm/p/11592463.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Repetitive Peak Off-State Voltage	VDRM	-	600	-	V	Tj = 25°C
Repetitive Peak Reverse Voltage	VRRM	-	600	-	V	Tj = 25°C
On-State Current (rms)	IT(RMS)	-	16	-	A	Tc = 30°C, sinewave
Non-Repetitive Peak On-State Current	I TM	-	75	-	A	Pulse width ≤ 10 ms, duty cycle 1%
Holding Current	IH	5	-	50	mA
Gate Trigger Current	IGT	5	25	50	mA
Gate Trigger Voltage	VGT	1.5	-	3	V
On-State Voltage Drop	VT	-	1.4	-	V	IT = 16 A
Junction Temperature Range	Tj	-55	-	125	°C
Storage Temperature Range	Tstg	-55	-	150	°C

Instructions for BTA24-600BWRG / BTA24-600BW:

1. Mounting and Handling:

   • Ensure proper heat sinking to maintain junction temperature within specified limits.
   • Handle with care to avoid damage to the component leads and body.

2. Electrical Connections:

   • Connect the gate terminal carefully to prevent short circuits.
   • Use insulated tools when making connections to avoid electrical hazards.

3. Operational Considerations:

   • Do not exceed the maximum ratings for voltage, current, and temperature.
   • Ensure that the device is adequately cooled, especially during high current operations.
   • Verify that the applied voltages and currents are within the specified limits to prevent premature failure.

4. Testing:

   • Test the device under controlled conditions to ensure it meets the application requirements.
   • Monitor the junction temperature during testing and operation.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Follow recommended storage conditions to preserve the integrity of the device.

6. Safety Precautions:

   • Always follow safety guidelines when handling high-voltage components.
   • Use appropriate personal protective equipment (PPE) when necessary.

(For reference only)