Details

---

BUY DSE160-12A https://www.utsource.net/itm/p/11592466.html

Parameter	Value	Unit
Input Voltage	100 - 240	VAC
Output Voltage	12	VDC
Output Current	13.3	A
Efficiency	Up to 88%	%
Power Factor	>0.95
No Load Power	<0.5	W
Operating Temp	-20 to +70	掳C
Storage Temp	-40 to +85	掳C
Humidity	0 to 95% (non-cond.)	% RH
Protection	Overload, Short-Circuit, Over-Temp
Mounting	Horizontal or Vertical
Certifications	CE, UL, CB
Dimensions	160 x 100 x 44	mm
Weight	1.6	kg

Instructions:

1. Installation:

   • Ensure the power supply is disconnected before installation.
   • Mount the power supply in a well-ventilated area to ensure proper heat dissipation.
   • Secure the power supply using the provided mounting brackets.

2. Wiring:

   • Connect the input AC power to the terminals marked "L" (Line) and "N" (Neutral).
   • Connect the output DC power to the terminals marked "+" (Positive) and "-" (Negative).

3. Operation:

   • Once wired, connect the power supply to the mains.
   • The power supply will automatically start providing the specified output voltage.
   • Monitor the temperature and ensure it does not exceed the operating range.

4. Maintenance:

   • Regularly inspect the power supply for any signs of damage or wear.
   • Clean the power supply with a dry cloth to remove dust and debris.
   • Do not use water or solvents to clean the power supply.

5. Troubleshooting:

   • No Output: Check the input voltage and connections.
   • Overheating: Ensure proper ventilation and check for any blockages.
   • Short Circuit: Disconnect the load and check for short circuits in the connected devices.

6. Safety Precautions:

   • Do not open the power supply case as it contains high-voltage components.
   • Do not expose the power supply to water or other liquids.
   • Follow all local electrical codes and regulations when installing the power supply.

(For reference only)