Details

---

BUY BYV34X-600,BYV34X600 https://www.utsource.net/itm/p/11603760.html

Parameter	Description	Value
Part Number	Full Part Number	BYV34X-600
Type	Type of Component	Thyristor
Case Package	Package Type	TO-220
Polarity	Polarity	Unidirectional
Maximum Repetitive Peak Off-State Voltage (VRRM)	Maximum Reverse Voltage	600 V
Maximum RMS On-State Current (IT(RMS))	RMS On-State Current	34 A
Maximum Non-Repetitive Peak On-State Current (ITSM)	Surge Current	200 A
Maximum Gate Trigger Current (IGT)	Gate Trigger Current	10 mA
Maximum Gate Trigger Voltage (VGT)	Gate Trigger Voltage	1.5 V
Maximum Junction Temperature (TJ(max))	Maximum Junction Temp	150 掳C
Storage Temperature Range (TSTG)	Storage Temperature	-65 to 150 掳C
Operating Temperature Range (TA)	Operating Temperature	-40 to 125 掳C
Mounting Torque	Mounting Torque for Screw Terminal	4.0 Nm

Instructions for Use:

1. Handling and Storage:

   • Store the component in a dry, cool place away from direct sunlight.
   • Handle with care to avoid mechanical damage to the leads and body.

2. Mounting:

   • Ensure the mounting surface is clean and flat.
   • Apply thermal compound to the mounting surface to improve heat dissipation.
   • Tighten the screw terminal to the specified torque of 4.0 Nm to ensure good electrical and thermal contact.

3. Electrical Connections:

   • Connect the anode and cathode terminals correctly to avoid reverse polarity.
   • Ensure the gate terminal is connected to the control circuit with appropriate current limiting resistors.

4. Thermal Management:

   • Use a heatsink if the component will operate at high currents or temperatures.
   • Monitor the junction temperature to ensure it does not exceed 150 掳C.

5. Surge Current Handling:

   • The component can handle non-repetitive peak on-state currents up to 200 A, but this should be for very short durations to avoid overheating.

6. Testing:

   • Before final assembly, test the component using a suitable tester to ensure it meets the specified parameters.

7. Safety Precautions:

   • Always use appropriate safety equipment when handling high-voltage components.
   • Follow all relevant safety guidelines and regulations.

(For reference only)