Details

---

BUY MBRB20100CT https://www.utsource.net/itm/p/11603766.html

Parameter	Symbol	Value	Unit
Maximum Repetitive Peak Reverse Voltage	VRRM	1000	V
Maximum RMS Voltage (Sinusoidal)	VRMS	707	V
Maximum DC Blocking Voltage	VDC	1000	V
Maximum Average Rectified Forward Current (Tc = 75掳C)	IF(AV)	20	A
Maximum RMS On-State Current (Tc = 75掳C, Sinusoidal)	IRMS	28.3	A
Non-Repetitive Peak Surge Current (Tj = 25掳C, 10 ms single half sine-wave)	IFSM	200	A
Junction Temperature Range	TJ	-55 to 175	掳C
Storage Temperature Range	TSTG	-65 to 150	掳C
Operating Temperature Range	TOPR	-55 to 150	掳C

Instructions for Use:

1. Mounting and Handling:

   • Handle the MBRB20100CT with care to avoid mechanical damage.
   • Ensure that the mounting surface is clean and flat to ensure good thermal contact.
   • Use appropriate heat sink if necessary to maintain the junction temperature within the specified range.

2. Electrical Connections:

   • Connect the anode and cathode terminals correctly to avoid reverse bias conditions that exceed the maximum ratings.
   • Ensure that the voltage applied does not exceed the maximum repetitive peak reverse voltage (VRRM) of 1000V.
   • The average rectified forward current (IF(AV)) should not exceed 20A at a case temperature of 75掳C.

3. Thermal Management:

   • Monitor the junction temperature (TJ) to ensure it stays within the range of -55掳C to 175掳C.
   • Use a heatsink or cooling mechanism if the device is expected to operate at high current levels or in high ambient temperatures.

4. Surge Current:

   • The non-repetitive peak surge current (IFSM) is rated at 200A for a 10 ms single half sine-wave at a junction temperature of 25掳C. Ensure that any surge currents do not exceed this value.

5. Storage and Operating Conditions:

   • Store the device in a dry environment within the storage temperature range of -65掳C to 150掳C.
   • Operate the device within the operating temperature range of -55掳C to 150掳C to ensure reliable performance.

6. Safety Precautions:

   • Follow all relevant safety guidelines when handling and testing high-voltage components.
   • Use appropriate protective equipment and ensure that the circuit is properly isolated before making any connections or measurements.

(For reference only)