Details

---

BUY 04N80C3 https://www.utsource.net/itm/p/11603782.html

Parameter	Description	Value	Unit
Part Number	Device Identifier	04N80C3	-
Type	Component Type	Optocoupler	-
Isolation Voltage	Maximum peak isolation voltage	5000	Vrms
Forward Current	Maximum forward current through the LED	60	mA
Forward Voltage	Typical forward voltage across the LED	1.2	V
Collector-Emitter Breakdown Voltage	Minimum collector-emitter breakdown voltage	70	V
Collector Current	Maximum collector current	50	mA
CTR (Current Transfer Ratio)	Min to Max current transfer ratio	200 to 600	%
Operating Temperature	Range of operating temperature	-40 to +110	°C

Instructions for Use:

1. Mounting and Handling:

   • Handle the device carefully to avoid mechanical damage.
   • Ensure proper mounting on the PCB to maintain optimal performance.

2. Electrical Connections:

   • Connect the LED side to the control circuit ensuring not to exceed the maximum forward current.
   • Connect the phototransistor side to the load circuit, keeping within the maximum collector current limits.

3. Power Supply:

   • Ensure that the power supply voltage does not exceed the specified limits for both the LED and phototransistor sides.

4. Heat Management:

   • Consider heat dissipation requirements, especially when operating at higher currents or temperatures.

5. Safety Precautions:

   • Respect the isolation voltage rating to prevent electrical hazards.
   • Avoid exceeding the maximum ratings listed in the table to ensure reliable operation and longevity.

6. Storage Conditions:

   • Store in a dry, cool place away from direct sunlight and corrosive environments.

7. Testing:

   • Before integrating into final designs, test the device under intended operating conditions to verify functionality.

(For reference only)