Details

---

BUY FS7M0880YDTU https://www.utsource.net/itm/p/11606957.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	2.7	-	5.5	V	Operating supply voltage
Input Voltage Range	VIN	-0.3	-	VDD+0.3	V	Input voltage range
Output Current	IOUT	-	800	-	mA	Continuous output current
Quiescent Current	IQ	-	1.5	-	mA	Quiescent current at no load
Shutdown Current	ISD	-	1	-	μA	Shutdown mode current
Operating Temperature	TOPR	-40	-	85	°C	Operating temperature range
Storage Temperature	TSTG	-55	-	150	°C	Storage temperature range

Instructions for FS7M0880YDTU

1. Power Supply Connection:

   • Connect the VDD pin to a power supply within the specified range (2.7V to 5.5V).
   • Ensure that the input voltage does not exceed VDD + 0.3V to avoid damaging the device.

2. Output Configuration:

   • The device can deliver up to 800mA of continuous current. Ensure that the load connected to the output does not exceed this limit.
   • Place a bypass capacitor (typically 0.1μF) close to the VDD pin to stabilize the power supply and reduce noise.

3. Thermal Considerations:

   • Operate the device within the temperature range of -40°C to 85°C. For extended temperature ranges, refer to the storage temperature limits.
   • If operating in high current conditions, ensure adequate heat dissipation to prevent overheating.

4. Shutdown Mode:

   • To enter shutdown mode, pull the enable pin low. In this mode, the current consumption drops to approximately 1μA.
   • Ensure that the enable pin is properly controlled to avoid unintended shutdowns.

5. Handling and Storage:

   • Store the device between -55°C and 150°C when not in use.
   • Handle with care to avoid electrostatic discharge (ESD), which can damage the component.

6. Application Notes:

   • Refer to the datasheet for detailed application notes and specific circuit configurations.
   • For optimal performance, follow recommended layout guidelines and ensure proper PCB design practices.

(For reference only)