Details

---

BUY 79M15G https://www.utsource.net/itm/p/11607002.html

Parameter	Description	Value
Part Number	Component Identifier	79M15G
Type	Voltage Regulator Type	Negative Voltage Regulator
Output Voltage	Nominal Output Voltage	-15V
Output Current	Maximum Continuous Output Current	100mA
Input Voltage Range	Operating Input Voltage Range	-18V to -35V
Dropout Voltage	Typical Dropout Voltage at Full Load	2V
Quiescent Current	Typical Quiescent Current	8mA
Thermal Resistance (胃JA)	Junction-to-Ambient Thermal Resistance	125掳C/W
Operating Temperature Range	Ambient Operating Temperature	-40掳C to +85掳C
Storage Temperature Range	Storage Temperature	-65掳C to +150掳C
Package	Physical Package Type	TO-92, TO-220

Instructions for Use:

1. Circuit Connection:

   • Input Pin (Pin 1): Connect to the input power supply.
   • Ground Pin (Pin 2): Connect to the common ground.
   • Output Pin (Pin 3): Connect to the load or circuit requiring regulated voltage.

2. Capacitors:

   • Input Capacitor: A 0.33渭F capacitor is recommended between the input pin and ground to stabilize the input voltage.
   • Output Capacitor: A 0.1渭F capacitor is recommended between the output pin and ground to filter out noise and improve stability.

3. Heat Dissipation:

   • For applications where the regulator will be operating near its maximum current, ensure adequate heat dissipation by using a heatsink or providing sufficient airflow.

4. Input Voltage:

   • Ensure the input voltage is within the specified range to avoid damage to the regulator and to maintain stable output.

5. Output Load:

   • The regulator is designed to provide up to 100mA of continuous output current. Ensure the load does not exceed this limit to prevent overheating and potential failure.

6. Thermal Management:

   • Monitor the temperature of the regulator, especially in high-power applications. The thermal resistance should be considered when designing the system to prevent overheating.

7. Storage and Handling:

   • Store the component in a dry environment within the specified storage temperature range to prevent damage.

8. Safety Precautions:

   • Follow standard safety practices when handling and soldering the component to avoid electrical shock and damage to the device.

(For reference only)