Details

---

BUY K2926 https://www.utsource.net/itm/p/11609453.html

Parameter	Description	Value
Part Number		K2926
Type	High-Frequency Transformer
Primary Winding	Number of Turns (Np)	10
Secondary Winding	Number of Turns (Ns)	50
Core Material		Ferrite
Operating Frequency	Range	20 kHz to 1 MHz
Primary Inductance	Minimum Value at 100 kHz	100 渭H
Secondary Inductance	Minimum Value at 100 kHz	2500 渭H
Isolation Voltage	Primary to Secondary	3000 Vrms
Temperature Range	Operating	-40掳C to +125掳C
Mounting Type		Surface Mount (SMT)
Dimensions	Length x Width x Height (LxWxH)	15 mm x 10 mm x 8 mm
Weight		3 g

Instructions for Use

1. Mounting:

   • Ensure that the transformer is mounted on a flat, stable surface.
   • Use appropriate soldering techniques to secure the leads to the PCB.

2. Wiring:

   • Connect the primary winding to the input power source.
   • Connect the secondary winding to the load or circuit requiring the transformed voltage.

3. Testing:

   • Before applying power, verify all connections and ensure that the transformer is correctly wired.
   • Apply the rated input voltage and frequency to the primary winding and measure the output voltage on the secondary winding.

4. Handling:

   • Handle the transformer with care to avoid damaging the windings or core.
   • Avoid exposing the transformer to excessive mechanical stress or environmental conditions outside the specified operating range.

5. Storage:

   • Store the transformer in a dry, cool place away from direct sunlight and corrosive materials.

6. Safety:

   • Ensure that the transformer is used within its specified isolation voltage and temperature range to prevent damage or safety hazards.
   • Always follow local electrical safety regulations and guidelines.

(For reference only)