Details

---

BUY RECTIFIER BRIDGE GBJ1510 15A 1000V DIP4 https://www.utsource.net/itm/p/11612007.html

Parameter	Value	Unit
Maximum Repetitive Peak Reverse Voltage (VRRM)	1000	V
Maximum Average Rectified Output Current (IO)	15	A
Maximum RMS Current (IRMS)	12.7	A
Peak Surge Current (IFSM)	300	A
Junction Temperature Range (TJ)	-55 to +150	°C
Storage Temperature Range (TS)	-55 to +150	°C
Package Type	DIP4

Instructions for Use:

1. Installation:

   • Ensure that the rectifier bridge is mounted on a suitable heat sink if operating near maximum current ratings to maintain optimal performance and longevity.
   • Insert the component into the PCB according to the correct pin configuration, ensuring that no pins are bent or misaligned.

2. Electrical Connections:

   • Connect the AC input to the two diagonal terminals marked as "~".
   • Connect the positive output terminal (marked "+") to the positive rail of your circuit.
   • Connect the negative output terminal (marked "-") to the negative rail or ground of your circuit.

3. Handling Precautions:

   • Handle the rectifier bridge with care to avoid damage to the leads or body.
   • Avoid exposing the component to excessive moisture or corrosive environments.
   • Follow standard ESD (Electrostatic Discharge) precautions when handling the component to prevent damage.

4. Operating Conditions:

   • Do not exceed the maximum voltage and current ratings specified in the table.
   • Ensure adequate ventilation or cooling if operating at high currents or in high ambient temperatures to prevent overheating.

5. Storage:

   • Store in a dry, cool place away from direct sunlight and sources of heat.
   • Keep components in original packaging until ready for use to protect against static damage.

(For reference only)