Details

---

BUY MP1526 MN1526 TO-3P A PAIR https://www.utsource.net/itm/p/11612013.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Input Voltage	VIN	4.5	-	40	V	Operating range
Output Voltage	VOUT	1.2	-	38	V	Adjustable
Output Current	IOUT	-	-	3.0	A	Continuous
Quiescent Current	IQ	-	1.2	3.0	mA	At no load
Dropout Voltage	VDROP	-	0.9	1.5	V	At IOUT = 3A
Shutdown Current	ISD	-	1.0	2.0	渭A	In shutdown mode
Thermal Shutdown	TSHDN	-	160	-	掳C	Junction temperature
Operating Temperature	TA	-40	-	125	掳C	Ambient temperature
Storage Temperature	TSTG	-65	-	150	掳C	Storage conditions
Package Type	-	-	-	-	TO-3P	-

Instructions for Use:

1. Input Voltage (V_IN):

   • Ensure the input voltage is within the specified range (4.5V to 40V) to avoid damage to the device.

2. Output Voltage (V_OUT):

   • The output voltage can be adjusted using external resistors. Refer to the datasheet for specific resistor values and configurations.

3. Output Current (I_OUT):

   • The device can provide up to 3.0A of continuous output current. Ensure adequate heat dissipation to prevent overheating.

4. Quiescent Current (I_Q):

   • The quiescent current is the current drawn by the device when there is no load. It is typically around 1.2mA at no load.

5. Dropout Voltage (V_DROP):

   • The dropout voltage is the minimum difference between the input and output voltages required to maintain regulation. It is typically 0.9V at 3A output current.

6. Shutdown Current (I_SD):

   • When the device is in shutdown mode, the current consumption is very low, typically around 1.0渭A.

7. Thermal Shutdown (T_SHDN):

   • The device will automatically shut down if the junction temperature exceeds 160掳C to prevent damage.

8. Operating Temperature (T_A):

   • The device is designed to operate in ambient temperatures ranging from -40掳C to 125掳C.

9. Storage Temperature (T_STG):

   • Store the device in temperatures ranging from -65掳C to 150掳C.

10. Package Type:

    • The MP1526 MN1526 is available in a TO-3P package. Ensure proper handling and mounting to avoid mechanical stress.

Additional Notes:

• Always use appropriate decoupling capacitors on the input and output to ensure stable operation.
• For high current applications, consider adding a heatsink to the TO-3P package to improve thermal performance.
• Consult the datasheet for detailed application circuits and layout recommendations.

(For reference only)