Details

---

BUY IRFR4105ZTRPBF,IRFR4105ZPBF https://www.utsource.net/itm/p/11614639.html

Parameter	IRFR4105ZTRPBF	IRFR4105ZPBF
Device Type	MOSFET	MOSFET
Package	TO-220FP-3	TO-220FP-3
Mounting Type	Surface Mount	Through Hole
VDSS (V)	55	55
RDS(on) (惟)	6.5 m惟 (max) at VGS = 10V	6.5 m惟 (max) at VGS = 10V
ID (A)	47 (continuous)	47 (continuous)
Power Dissipation (W)	100	100
Operating Temperature (掳C)	-55 to +150	-55 to +150
Storage Temperature (掳C)	-65 to +150	-65 to +150
Gate Charge (QG, nC)	125 (max) at VDS = 55V	125 (max) at VDS = 55V
Input Capacitance (Ciss, pF)	1600 (max) at VDS = 55V	1600 (max) at VDS = 55V
Output Capacitance (Coss, pF)	360 (max) at VDS = 55V	360 (max) at VDS = 55V
Reverse Transfer Capacitance (Crss, pF)	110 (max) at VDS = 55V	110 (max) at VDS = 55V
Thermal Resistance (R胃JC, 掳C/W)	1.5 (max)	1.5 (max)
Thermal Resistance (R胃JA, 掳C/W)	40 (max)	40 (max)

Instructions for Use:

1. Handling Precautions:

   • Avoid exposing the device to excessive static electricity.
   • Use proper grounding techniques when handling the device.

2. Mounting:

   • For IRFR4105ZTRPBF (Surface Mount):
     • Ensure the PCB is clean and free of contaminants.
     • Apply solder paste to the pads and place the device carefully.
     • Use reflow soldering with appropriate temperature profiles.
   • For IRFR4105ZPBF (Through Hole):
     • Insert the leads into the PCB holes.
     • Solder the leads on the reverse side of the PCB.
     • Trim excess leads after soldering.

3. Thermal Management:

   • Ensure adequate heat sinking to maintain the junction temperature within safe limits.
   • Use thermal paste between the heat sink and the device for better thermal conductivity.

4. Electrical Connections:

   • Connect the drain, source, and gate terminals according to the circuit diagram.
   • Use short and wide traces for high current paths to minimize resistance and inductance.

5. Testing:

   • Test the device under controlled conditions to ensure it meets the specified parameters.
   • Monitor the temperature and electrical characteristics during operation.

6. Storage:

   • Store the devices in a dry, cool place away from direct sunlight.
   • Follow the recommended storage temperature range to avoid damage.

7. Safety:

   • Always follow safety guidelines when working with high voltages and currents.
   • Use appropriate personal protective equipment (PPE) as needed.

(For reference only)