Details

---

BUY KSE350STU KSE340STU https://www.utsource.net/itm/p/11614672.html

Parameter	KSE350STU	KSE340STU
Type	Hall Effect Sensor	Hall Effect Sensor
Operating Voltage	4.5V to 24V	4.5V to 24V
Output Type	NPN Open Collector	NPN Open Collector
Maximum Load Current	20mA	20mA
Sensing Distance	1mm to 5mm	1mm to 5mm
Response Frequency	Up to 2kHz	Up to 2kHz
Operating Temperature	-40°C to 85°C	-40°C to 85°C
Storage Temperature	-40°C to 125°C	-40°C to 125°C
Protection Features	Reverse Polarity, Overvoltage	Reverse Polarity, Overvoltage

Instructions for Use:

1. Power Supply Connection:

   • Connect the positive terminal of the power supply to the VCC pin.
   • Connect the negative terminal of the power supply to the GND pin.

2. Output Connection:

   • Connect the output (OUT) pin to your load or microcontroller input pin.
   • Ensure the load current does not exceed 20mA.

3. Installation:

   • Position the sensor within the specified sensing distance from the magnetic field source.
   • Ensure there are no metallic objects interfering with the sensing area.

4. Handling Precautions:

   • Avoid exposing the sensor to temperatures outside the operating range.
   • Protect against reverse polarity and overvoltage conditions by using appropriate circuit protection devices.

5. Testing:

   • Test the sensor in a controlled environment to ensure it operates within expected parameters before deploying in actual applications.

(For reference only)