Details

---

BUY FDPF12N50T ORIGINAL GOODS IN STOCK https://www.utsource.net/itm/p/11617193.html

Parameter	Description	Value
Part Number	Component Identifier	FDPF12N50T
Type	Component Type	MOSFET (N-Channel)
Brand	Manufacturer	Fairchild Semiconductor (ON Semiconductor)
Package	Housing/Case	TO-247-3, TO-247
Vds (Max)	Drain-to-Source Voltage	500 V
Vgs (Max)	Gate-to-Source Voltage	卤20 V
Id (Continuous)	Continuous Drain Current	12 A
Rds(on) (Max)	On-State Resistance at Vgs = 10 V	0.9 惟
Power Dissipation (Max)	Maximum Power Dissipation	150 W
Operating Temperature Range	Junction Temperature	-55掳C to +150掳C
Storage Temperature Range	Storage Temperature	-65掳C to +150掳C
Gate Charge	Total Gate Charge	100 nC
Input Capacitance	Input Capacitance at Vds = 0 V, f = 1 MHz	1500 pF
Output Capacitance	Output Capacitance at Vds = 0 V, f = 1 MHz	2500 pF
Reverse Transfer Capacitance	Reverse Transfer Capacitance at Vds = 0 V, f = 1 MHz	500 pF
Switching Characteristics	Turn-On Delay Time	40 ns
Switching Characteristics	Rise Time	80 ns
Switching Characteristics	Turn-Off Delay Time	50 ns
Switching Characteristics	Fall Time	100 ns

Instructions for Use:

1. Handling Precautions:

   • Handle the device with care to avoid damage to the leads and body.
   • Use proper ESD (Electrostatic Discharge) protection to prevent damage from static electricity.

2. Mounting:

   • Ensure that the mounting surface is clean and flat.
   • Apply a suitable thermal compound between the device and the heat sink to improve thermal conductivity.
   • Torque the mounting screws to the recommended specifications to avoid over-tightening and potential damage.

3. Soldering:

   • Preheat the device to reduce thermal shock.
   • Use a soldering iron with a temperature not exceeding 300掳C.
   • Solder each lead for no more than 3 seconds to avoid overheating.

4. Operation:

   • Ensure that the operating conditions (voltage, current, temperature) do not exceed the maximum ratings.
   • Use appropriate gate drive circuits to ensure reliable switching performance.
   • Monitor the device temperature during operation to prevent overheating.

5. Testing:

   • Use a multimeter or oscilloscope to verify the correct operation of the device.
   • Test the device under controlled conditions to ensure it meets the required specifications.

6. Storage:

   • Store the device in a dry, cool place away from direct sunlight.
   • Keep the device in its original packaging until ready for use to protect against moisture and physical damage.

For detailed technical information and additional specifications, refer to the datasheet provided by the manufacturer.

(For reference only)