Details

---

BUY 67L100 https://www.utsource.net/itm/p/11617643.html

Parameter	Symbol	Min	Typical	Max	Unit
Input Voltage	V_IN	2.7	-	5.5	V
Output Voltage	V_OUT	-	3.3	-	V
Output Current	I_OUT	-	100	-	mA
Quiescent Current	I_Q	-	10	-	渭A
Dropout Voltage	V_DROPOUT	-	0.3	-	V
Load Regulation	-	-	1%	-
Line Regulation	-	-	1%	-
PSRR (at 1 kHz)	-	-	60	-	dB
Operating Temperature	T_OP	-40	-	85	掳C
Storage Temperature	T_STG	-65	-	150	掳C

Instructions for Use

1. Input Connection:

   • Connect the input voltage (V_IN) to the VIN pin.
   • Ensure the input voltage is within the range of 2.7V to 5.5V.

2. Output Connection:

   • Connect the output load to the VOUT pin.
   • The typical output voltage is 3.3V, and it can supply up to 100mA of current.

3. Ground Connection:

   • Connect the ground (GND) pin to the common ground of your circuit.

4. Capacitors:

   • Place a 1渭F ceramic capacitor between VIN and GND as close to the device as possible.
   • Place a 1渭F ceramic capacitor between VOUT and GND as close to the device as possible.

5. Thermal Management:

   • Ensure adequate heat dissipation if the device is operating near its maximum output current or in high ambient temperatures.

6. Stability:

   • The device is stable with ceramic capacitors. Avoid using electrolytic capacitors without additional series resistance.

7. Storage and Handling:

   • Store the device in a dry environment within the temperature range of -65掳C to 150掳C.
   • Handle the device with care to avoid static damage. Use appropriate ESD protection.

8. Testing:

   • Before finalizing the design, test the device under all expected operating conditions to ensure it meets performance requirements.

(For reference only)