Details

---

BUY 74ACT153SCX https://www.utsource.net/itm/p/11618651.html
MULTIPLEXER DUAL 4IN HS 16SOIC

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VCC	2.0	-	5.5	V	-
Output High Level Voltage	VOH	-	-	VCC - 0.1	V	IOL = -0.1 mA, VCC = 4.5V to 5.5V
Output Low Level Voltage	VOL	0.0	-	0.1	V	IOL = 16 mA, VCC = 4.5V to 5.5V
Input High Level Voltage	VIH	2.0	-	VCC	V	-
Input Low Level Voltage	VIL	0.0	-	0.8	V	-
Propagation Delay Time (High to Low)	tPLH	-	3.5	-	ns	VCC = 5V, TA = 25°C
Propagation Delay Time (Low to High)	tPHL	-	3.5	-	ns	VCC = 5V, TA = 25°C
Power Dissipation	PD	-	-	100	mW	-
Operating Temperature Range	TA	-40	-	85	°C	-
Storage Temperature Range	TSTG	-65	-	150	°C	-

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 2.0V to 5.5V.
   • Connect V_CC to the positive power supply and GND to the ground.

2. Input Signals:

   • Input signals should be within the specified input voltage levels (V_IL and V_IH).
   • Avoid applying voltages outside the specified range to prevent damage.

3. Output Signals:

   • The output high level (V_OH) and low level (V_OL) voltages are dependent on the supply voltage and load current.
   • Ensure that the load current does not exceed the maximum ratings to avoid overheating or damage.

4. Propagation Delay:

   • The propagation delay times (t_PLH and t_PHL) are critical for timing considerations in your circuit.
   • These values are typically measured at V_CC = 5V and ambient temperature (TA) = 25°C.

5. Temperature Considerations:

   • The device is designed to operate within the temperature range of -40°C to 85°C.
   • Store the device in a temperature range of -65°C to 150°C to ensure long-term reliability.

6. Power Dissipation:

   • The maximum power dissipation (P_D) is 100 mW. Ensure adequate heat sinking if operating near this limit to prevent thermal runaway.

7. Handling Precautions:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Follow proper ESD (Electrostatic Discharge) handling procedures during assembly and testing.

By following these guidelines, you can ensure reliable operation and longevity of the 74ACT153SCX device.

(For reference only)