Details

---

BUY SN7416N https://www.utsource.net/itm/p/11622509.html
IC INVERTER OPEN COL 6CH 14DIP

Parameter	Symbol	Min	Typ	Max	Unit
Supply Voltage	VCC	4.75	5.0	5.25	V
Input Low Voltage	VIL	0.0	-	0.8	V
Input High Voltage	VIH	2.0	-	VCC	V
Output Low Voltage	VOL	0.0	-	0.4	V
Output High Voltage	VOH	2.4	-	VCC - 0.1	V
Input Leakage Current	IIL	-1.0	-	0.1	mA
Output Sink Current	IOL	-	8	16	mA
Output Source Current	IOH	-	-4	-8	mA
Propagation Delay Time	tpd	10	20	35	ns
Power Dissipation	PD	-	-	500	mW

Instructions for SN7416N:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 4.75V to 5.25V.
   • Connect the ground (GND) pin to a stable 0V reference.

2. Input Signals:

   • Apply input signals such that the low level (V_IL) is between 0V and 0.8V, and the high level (V_IH) is between 2.0V and V_CC.

3. Output Signals:

   • The output low voltage (V_OL) should not exceed 0.4V when sinking current.
   • The output high voltage (V_OH) should be at least 2.4V when sourcing current, but not more than V_CC - 0.1V.

4. Current Ratings:

   • The input leakage current (I_IL) should be within ±1.0mA.
   • The output can sink up to 16mA (I_OL) and source up to 8mA (I_OH).

5. Propagation Delay:

   • The propagation delay time (t_pd) should be between 10ns and 35ns under typical conditions.

6. Power Dissipation:

   • Ensure the total power dissipation (P_D) does not exceed 500mW to avoid overheating.

7. Handling:

   • Handle the device with care to avoid static damage. Use appropriate ESD protection measures.
   • Store the device in a dry, cool place to prevent moisture damage.

8. Mounting:

   • Solder the device to the PCB using recommended soldering temperatures and times to avoid thermal stress.
   • Ensure proper alignment and orientation during assembly to prevent shorts or open circuits.

9. Testing:

   • Test the device after assembly to ensure it meets the specified electrical characteristics.
   • Use a multimeter or oscilloscope to verify input and output levels and timing parameters.

(For reference only)