Details

---

BUY IR2166 https://www.utsource.net/itm/p/11626552.html
IC PFC/BALLAST CONTROL 16-DIP

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VCC	10	-	20	V	-
Gate Drive Output Voltage	VGS	10	-	15	V	-
High-Side Floating Voltage	VBS	0	-	600	V	-
Input High Level Voltage	VIH	2.0	-	7.5	V	-
Input Low Level Voltage	VIL	0.8	-	2.0	V	-
Propagation Delay Time	td	-	60	90	ns	VCC = 15V, TA = 25°C
Pulse Width Distortion	tpd	-	20	40	ns	VCC = 15V, TA = 25°C
Operating Junction Temperature	TJ	-40	-	150	°C	-
Storage Temperature	TSTG	-65	-	150	°C	-

Instructions for Using the IR2166:

1. Supply Voltage (V_CC):

   • Ensure the supply voltage is within the range of 10V to 20V. Exceeding this range can damage the device.

2. Gate Drive Output Voltage (V_GS):

   • The gate drive output voltage should be set between 10V and 15V to ensure proper operation of the MOSFETs or IGBTs being driven.

3. High-Side Floating Voltage (V_BS):

   • The high-side floating voltage can go up to 600V, allowing the IR2166 to be used in high-voltage applications.

4. Input Logic Levels:

   • The input high level voltage (V_IH) should be between 2.0V and 7.5V.
   • The input low level voltage (V_IL) should be between 0.8V and 2.0V.

5. Propagation Delay and Pulse Width Distortion:

   • The propagation delay time (t_d) is typically 60ns with a maximum of 90ns.
   • The pulse width distortion (t_pd) is typically 20ns with a maximum of 40ns. These values are measured at V_CC = 15V and T_A = 25°C.

6. Operating and Storage Temperature:

   • The operating junction temperature (T_J) should be kept between -40°C and 150°C.
   • The storage temperature (T_STG) should be between -65°C and 150°C.

7. Circuit Design Considerations:

   • Use appropriate decoupling capacitors near the power supply pins to minimize noise and ensure stable operation.
   • Ensure that the bootstrap capacitor is correctly sized to maintain the high-side gate drive voltage during switching.
   • Use external resistors to limit the gate drive current if necessary, especially when driving high-power devices.

8. Safety Precautions:

   • Handle the IR2166 with care to avoid static discharge, which can damage the device.
   • Ensure proper heat sinking if the device is expected to dissipate significant power.

By following these guidelines, you can ensure reliable and efficient operation of the IR2166 in your application.

(For reference only)