Details

---

BUY ICL3232CV https://www.utsource.net/itm/p/11627426.html
IC TRANSCEIVER FULL 2/2 16TSSOP

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	4.5	-	18	V	Operating input voltage range
Output Voltage	VOUT	1.8	-	5.0	V	Adjustable output voltage range
Output Current	IOUT	-	300	-	mA	Maximum continuous output current
Efficiency	η	-	90	-	%	Typical efficiency at nominal conditions
Switching Frequency	fSW	-	1.2	-	MHz	Nominal switching frequency
Quiescent Current	IQ	-	50	-	μA	Quiescent current at no load
Dropout Voltage	VDROP	-	1.2	-	V	Typical dropout voltage at maximum load
Load Regulation	ΔVOUT/ΔIOUT	-	0.1	-	%/A	Change in output voltage with respect to load current
Line Regulation	ΔVOUT/ΔVIN	-	0.01	-	%/V	Change in output voltage with respect to input voltage
Thermal Shutdown	TSD	-	160	-	°C	Temperature at which thermal shutdown is initiated
Operating Temperature	TOP	-40	-	85	°C	Operating temperature range
Storage Temperature	TSTG	-65	-	150	°C	Storage temperature range
Package Type	-	-	-	-	-	CV (8-pin SOIC)

Instructions for Using ICL3232CV

1. Power Supply Connection:

   • Connect the input voltage (V_IN) to the VIN pin.
   • Ensure the input voltage is within the specified range (4.5V to 18V).

2. Output Configuration:

   • Connect the output voltage (V_OUT) to the VOUT pin.
   • Use an external resistor network to set the desired output voltage within the range of 1.8V to 5.0V.

3. Ground Connection:

   • Connect the ground (GND) to the GND pin to ensure proper operation and stability.

4. Capacitors:

   • Place a 10μF tantalum capacitor between VIN and GND close to the device to filter input noise.
   • Place a 10μF ceramic capacitor between VOUT and GND to stabilize the output.

5. Thermal Management:

   • Ensure adequate heat dissipation by providing a heatsink if operating at high output currents or in high ambient temperatures.
   • Monitor the junction temperature to avoid exceeding the thermal shutdown threshold (160°C).

6. Protection Circuits:

   • The device includes overcurrent and thermal protection. However, it is recommended to add external fuses and diodes for additional safety.

7. Layout Considerations:

   • Keep the PCB layout compact to minimize parasitic inductances and capacitances.
   • Use wide traces for power and ground connections to reduce resistance and improve thermal performance.

8. Testing and Validation:

   • Before finalizing the design, test the circuit under various load and input conditions to ensure stability and performance.
   • Verify the output voltage accuracy and regulation under different operating conditions.

By following these instructions, you can ensure reliable and efficient operation of the ICL3232CV in your application.

(For reference only)