Details

---

BUY SN74LVC1G17MDCKREP https://www.utsource.net/itm/p/11628320.html
IC BUF NON-INVERT 5.5V SC70-5

Parameter	Description	Min	Typ	Max	Unit
VCC	Supply Voltage	1.65	-	5.5	V
IOH	Output High Current	-	-	24	mA
IOL	Output Low Current	-40	-	-	mA
tpd	Propagation Delay Time	-	3.5	8.5	ns
tphl	High-to-Low Propagation Delay	-	3.5	8.5	ns
tplh	Low-to-High Propagation Delay	-	3.5	8.5	ns
IIN	Input Current	-1	-	1	μA
VIH	Input High Voltage	2.0	-	VCC	V
VIL	Input Low Voltage	0	-	0.8	V
VOH	Output High Voltage	2.4	-	VCC - 0.1	V
VOL	Output Low Voltage	0	-	0.1	V
Power Dissipation	Maximum Power Dissipation	-	-	100	mW

Instructions for Use:

1. Supply Voltage (V_CC):

   • Ensure the supply voltage is within the range of 1.65V to 5.5V.
   • Connect V_CC to the power supply and GND to the ground.

2. Input Signals:

   • Input high (V_IH) should be at least 2.0V and can go up to V_CC.
   • Input low (V_IL) should be no more than 0.8V.
   • Keep input current (I_IN) within ±1μA to avoid damage.

3. Output Signals:

   • Output high (V_OH) will be at least 2.4V and can go up to V_CC - 0.1V.
   • Output low (V_OL) will be no more than 0.1V.
   • Ensure the output current (I_OH and I_OL) does not exceed 24mA and -40mA, respectively.

4. Propagation Delays:

   • The propagation delay time (t_pd) is typically 3.5ns with a maximum of 8.5ns.
   • High-to-low (t_phl) and low-to-high (t_plh) propagation delays are also 3.5ns typical and 8.5ns maximum.

5. Power Dissipation:

   • Do not exceed 100mW of power dissipation to prevent overheating and potential damage.

6. Handling:

   • Handle the device with care to avoid static damage.
   • Follow proper ESD (Electrostatic Discharge) precautions during handling and installation.

7. Storage:

   • Store the device in a dry, cool place away from direct sunlight and extreme temperatures.

(For reference only)