Details

---

BUY BA10324A https://www.utsource.net/itm/p/11628413.html
IC OPAMP DIFF 4 CIRCUIT 14DIP

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	4.5	-	40	V	Operating input voltage range
Output Voltage	VOUT	-	5	-	V	Fixed output voltage
Output Current	IOUT	-	3	3.5	A	Maximum continuous output current
Quiescent Current	IQ	-	2	5	渭A	Quiescent current at no load
Dropout Voltage	VDROP	-	0.3	0.7	V	Dropout voltage at IOUT = 3A
Load Regulation	-	-	0.2	1.0	%	Change in output voltage over load range
Line Regulation	-	-	0.1	0.5	%/V	Change in output voltage with respect to input
Ripple Rejection	-	60	70	80	dB	Power supply rejection ratio (PSRR)
Operating Temperature	TOP	-40	-	125	掳C	Operating temperature range
Storage Temperature	TSTG	-65	-	150	掳C	Storage temperature range

Instructions for Use:

1. Input Voltage:

   • Ensure the input voltage is within the specified range (4.5V to 40V) to avoid damage or improper operation.

2. Output Voltage:

   • The BA10324A provides a fixed output voltage of 5V. No external components are required for voltage setting.

3. Output Current:

   • The device can provide up to 3.5A of continuous output current. For reliable operation, ensure the load does not exceed 3A continuously.

4. Quiescent Current:

   • The quiescent current is very low, typically around 2渭A, which makes it suitable for battery-powered applications.

5. Dropout Voltage:

   • The dropout voltage is relatively low, typically around 0.3V at full load, allowing for efficient operation even when the input voltage is close to the output voltage.

6. Regulation:

   • The load regulation is 0.2% to 1.0%, ensuring stable output voltage under varying load conditions.
   • The line regulation is 0.1% to 0.5% per volt, maintaining a consistent output voltage as the input voltage changes.

7. Ripple Rejection:

   • The power supply rejection ratio (PSRR) is between 60dB and 80dB, effectively filtering out input ripple and noise.

8. Temperature Range:

   • The device operates reliably over a wide temperature range from -40掳C to 125掳C, making it suitable for various environmental conditions.
   • Store the device in temperatures ranging from -65掳C to 150掳C.

9. Mounting and Layout:

   • Ensure proper heat dissipation by using a heatsink if operating at high currents or in high ambient temperatures.
   • Follow good PCB layout practices to minimize noise and parasitic effects.

10. Protection Features:

    • The BA10324A includes overcurrent and thermal shutdown protection to prevent damage under fault conditions.

By following these guidelines, you can ensure optimal performance and reliability of the BA10324A in your application.

(For reference only)