Details

---

BUY MTFC4GACAJCN-4M IT https://www.utsource.net/itm/p/11649508.html

Parameter	Description	Value
Part Number	Full Part Number	MTFC4GACAJCN-4M IT
Type	Type of Device	NAND Flash
Density	Storage Capacity	4 Gb (512 MB)
Organization	Data Organization	16K x 32 Banks
Interface	Interface Type	Toggle Mode 2.0
Voltage (Vcc)	Supply Voltage	1.8V ± 0.1V
Operating Temperature	Operating Temperature Range	-40°C to +85°C
Package	Package Type	BGA
Pin Count	Number of Pins	16
Data Rate	Maximum Data Transfer Rate	400 MT/s
ECC	Error Correction Code	Up to 24-bit ECC
Program/Erase Cycles	Endurance	3,000 P/E Cycles
Retention	Data Retention	10 years at 25°C
Access Time	Page Read Access Time	50 μs
Block Size	Block Size	256 KB
Page Size	Page Size	2 KB + 64 B Spare
Write Protect	Write Protect Feature	Yes
RoHS Compliance	RoHS Compliance	Yes

Instructions for Use:

1. Power Supply:

   • Ensure that the supply voltage (Vcc) is within the specified range of 1.8V ± 0.1V.
   • Use appropriate decoupling capacitors to stabilize the power supply.

2. Signal Integrity:

   • Keep signal traces as short as possible to minimize noise and reflections.
   • Use controlled impedance traces for high-speed signals.

3. Initialization:

   • Upon power-up, ensure that the device is properly initialized by following the initialization sequence specified in the datasheet.
   • Set the necessary configuration registers according to your application requirements.

4. Read/Write Operations:

   • Use the correct command sequences for read and write operations.
   • Ensure that the device is not accessed during busy periods (e.g., while a program or erase operation is in progress).

5. Error Handling:

   • Implement error correction code (ECC) algorithms to handle bit errors.
   • Monitor the status registers to detect and handle any errors or failures.

6. Temperature Considerations:

   • Operate the device within the specified temperature range (-40°C to +85°C).
   • Use thermal management techniques if operating in extreme conditions.

7. Endurance and Retention:

   • Be aware of the endurance (3,000 P/E cycles) and data retention (10 years at 25°C) specifications.
   • Plan for wear leveling and data refresh mechanisms if required.

8. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store the device in a dry, cool environment to prevent moisture damage.

9. Compliance:

   • Ensure that the device complies with all relevant environmental regulations (e.g., RoHS).

For detailed information, refer to the specific datasheet and application notes provided by the manufacturer.

(For reference only)