Details

---

BUY AM26C32ID https://www.utsource.net/itm/p/11654221.html

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Supply Voltage	VCC	4.5	-	5.5	V
Output Current (Source)	IOH	-	10	-	mA	@ VCC = 5V, VO = 2.4V
Output Current (Sink)	IOL	-	10	-	mA	@ VCC = 5V, VO = 0.4V
Input Current	IIH	-	1.0	-	渭A	@ VCC = 5V, VI = 5V
Input Current	IIL	-	-1.0	-	渭A	@ VCC = 5V, VI = 0V
Propagation Delay Time	tpd	-	15	-	ns	@ VCC = 5V, TA = 25掳C
Power Consumption	PD	-	100	-	mW	@ VCC = 5V, All Outputs High
Operating Temperature	TOP	-40	-	85	掳C
Storage Temperature	TSTG	-65	-	150	掳C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the specified range of 4.5V to 5.5V.
   • Connect the ground (GND) pin to the system ground.

2. Input Handling:

   • Apply input voltages (V_I) within the range of 0V to V_CC.
   • Be cautious not to exceed the maximum input current ratings to avoid damage to the device.

3. Output Handling:

   • The device can source or sink up to 10mA per output pin.
   • Ensure that the load connected to the output pins does not exceed this current limit.

4. Propagation Delay:

   • The typical propagation delay time (t_pd) is 15ns at room temperature (25掳C). This may vary with temperature and supply voltage.

5. Temperature Considerations:

   • The device is designed to operate within an ambient temperature range of -40掳C to 85掳C.
   • Store the device in a temperature range of -65掳C to 150掳C to ensure long-term reliability.

6. Power Consumption:

   • The power consumption (P_D) should be monitored to avoid overheating. At full load, the device consumes approximately 100mW.

7. Handling Precautions:

   • Handle the device with care to avoid static discharge, which can damage the internal circuits.
   • Follow proper soldering techniques to prevent thermal shock and mechanical stress during assembly.

8. Testing:

   • Before integrating the device into a circuit, perform initial testing to verify functionality and performance parameters.

By following these guidelines, you can ensure optimal performance and reliability of the AM26C32ID device.

(For reference only)