Details

---

BUY CY62157EV30LL-45ZXI https://www.utsource.net/itm/p/11655236.html

Parameter	Description	Value
Device Type	16K x 8 CMOS SRAM	-
Package	30-pin Plastic SOP (Small Outline Package)	-
Operating Voltage (Vcc)	Supply Voltage Range	2.5V to 3.6V
Standby Current (Icc)	Typical at Vcc = 3.0V, Ta = 25掳C	1 渭A
Active Current (Icc)	Typical at Vcc = 3.0V, f = 10 MHz, Ta = 25掳C	10 mA
Access Time (tAA)	Access Time at Vcc = 3.0V, f = 10 MHz, Ta = 25掳C	45 ns
Data Retention Time	Data Retention at Vcc = 2.5V, Ta = 25掳C	20 years
Operating Temperature Range (Ta)	Industrial Temperature Range	-40掳C to +85掳C
Storage Temperature Range (Tstg)	Storage Temperature	-65掳C to +150掳C
Input Voltage (VIH, VIL)	High-Level Input Voltage, Low-Level Input Voltage	VIH: 2.0V to Vcc, VIL: 0V to 0.8V
Output Voltage (VOH, VOL)	High-Level Output Voltage, Low-Level Output Voltage	VOH: Vcc - 0.2V, VOL: 0.2V
Write Cycle Time (tWC)	Write Cycle Time at Vcc = 3.0V, f = 10 MHz, Ta = 25掳C	45 ns
Read Cycle Time (tRC)	Read Cycle Time at Vcc = 3.0V, f = 10 MHz, Ta = 25掳C	45 ns
Address Setup Time (tAS)	Address Setup Time at Vcc = 3.0V, f = 10 MHz, Ta = 25掳C	15 ns
Address Hold Time (tAH)	Address Hold Time at Vcc = 3.0V, f = 10 MHz, Ta = 25掳C	0 ns
Output Enable (OE) Delay Time (tOHZ, tOLZ)	Output Enable to Output Valid, Output Enable to Output Invalid	tOHZ: 15 ns, tOLZ: 15 ns
Write Enable (WE) Delay Time (tWHZ, tWLZ)	Write Enable to Output Valid, Write Enable to Output Invalid	tWHZ: 15 ns, tWLZ: 15 ns
Power-down Mode	Enters Power-down Mode when CE# is High	-
Pin Configuration	Pinout Diagram	Refer to Datasheet for Pinout Diagram

Instructions:

1. Power Supply: Ensure the supply voltage (Vcc) is within the specified range of 2.5V to 3.6V.
2. Temperature Range: Operate the device within the industrial temperature range of -40掳C to +85掳C.
3. Signal Levels: Use appropriate signal levels for inputs (VIH, VIL) and outputs (VOH, VOL) as specified.
4. Timing Requirements: Adhere to the timing parameters such as access time (tAA), write cycle time (tWC), and read cycle time (tRC) to ensure reliable operation.
5. Power-down Mode: To enter power-down mode, set the chip enable (CE#) pin high.
6. Storage: Store the device in a temperature-controlled environment within the storage temperature range of -65掳C to +150掳C.
7. Pin Configuration: Refer to the datasheet for the detailed pin configuration and pinout diagram.

For more detailed information, refer to the official datasheet provided by the manufacturer.

(For reference only)