Details

---

BUY M95160-WMN6P https://www.utsource.net/itm/p/11657390.html

Parameter	Description	Value
Device Type	Non-Volatile Static Random Access Memory (NVS RAM)
Memory Size	Total Memory Capacity	16 Kbit (2048 x 8)
Operating Voltage	VCC Supply Voltage Range	1.65V to 3.6V
Standby Current	IDDQ at VCC = 3.6V	1 渭A (max)
Active Current	IDD at VCC = 3.6V, f = 1 MHz	3 mA (max)
Data Retention Time	Data Retention at 85掳C	10 years (min)
Write Cycle Time	tWCY	5 ms (max)
Read Cycle Time	tRCY	100 ns (max)
Operating Temperature	TA Operating Ambient Temperature Range	-40掳C to +85掳C
Package Type	Package	8-pin SOIC (Small Outline Integrated Circuit)
Pin Configuration	Pin Count	8
Clock Frequency	Maximum Clock Frequency	1 MHz
Data Bus Width	Data Bus Width	8-bit
Endurance	Write/Read Endurance	1,000,000 cycles (min)

Instructions for Using M95160-WMN6P

1. Power Supply:

   • Ensure that the V_CC supply voltage is within the specified range of 1.65V to 3.6V.
   • Connect the V_SS pin to ground.

2. Clock Signal:

   • Apply a clock signal to the SCLK pin with a frequency up to 1 MHz.

3. Data Communication:

   • Use the SDI (Serial Data In) and SDO (Serial Data Out) pins for data communication.
   • The CS (Chip Select) pin must be held low to enable communication.

4. Write Operation:

   • To write data, ensure the WP (Write Protect) pin is held high.
   • Send the write command followed by the address and data to be written.
   • The write cycle time is 5 ms maximum.

5. Read Operation:

   • Send the read command followed by the address of the data to be read.
   • The read cycle time is 100 ns maximum.

6. Data Retention:

   • Data retention is guaranteed for at least 10 years at 85掳C.

7. Endurance:

   • The device can withstand up to 1,000,000 write/read cycles.

8. Temperature Considerations:

   • Ensure the operating ambient temperature is within the range of -40掳C to +85掳C.

9. Handling Precautions:

   • Handle the device with care to avoid static damage.
   • Follow standard ESD (Electrostatic Discharge) precautions during handling and installation.

(For reference only)