Details

---

BUY N82S135N https://www.utsource.net/itm/p/11658150.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Supply Voltage	Vcc	4.75	5	5.25	V
Output Voltage (High)	VOH	3.5	4.5	5	V	@ IOH = -0.4 mA, Vcc = 5V
Output Voltage (Low)	VOL	0	0.4	0.6	V	@ IOL = 8 mA, Vcc = 5V
Input Voltage (High)	VIH	2	3.5	5	V
Input Voltage (Low)	VIL	0	1.5	2	V
Propagation Delay Time	tpd	-	9	15	ns	@ Vcc = 5V, TA = 25掳C
Power Dissipation	PD	-	100	150	mW
Operating Temperature	Topr	-40	-	85	掳C
Storage Temperature	Tstg	-65	-	150	掳C

Instructions for Using N82S135N:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 4.75V to 5.25V.
   • Use a stable power supply to avoid voltage fluctuations that can affect performance.

2. Input Signals:

   • For a high input signal, the voltage should be between 2V and 5V.
   • For a low input signal, the voltage should be between 0V and 2V.
   • Ensure input signals are clean and within the specified range to avoid incorrect operation.

3. Output Signals:

   • When the output is high, the voltage will be between 3.5V and 5V.
   • When the output is low, the voltage will be between 0V and 0.6V.
   • The output current should not exceed the specified limits to prevent damage to the device.

4. Propagation Delay:

   • The typical propagation delay time is 9ns at Vcc = 5V and ambient temperature (TA) = 25掳C.
   • Consider this delay when designing timing-critical circuits.

5. Power Dissipation:

   • The maximum power dissipation is 150mW. Ensure adequate heat sinking or cooling if operating near this limit to prevent overheating.

6. Temperature Range:

   • The operating temperature range is from -40掳C to 85掳C.
   • The storage temperature range is from -65掳C to 150掳C.
   • Avoid exposing the device to temperatures outside these ranges to prevent damage.

7. Handling:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Follow proper ESD (Electrostatic Discharge) precautions during handling and installation.

8. Mounting:

   • Ensure proper mounting and soldering techniques to avoid mechanical stress on the device.
   • Use appropriate PCB layout and grounding practices to minimize noise and interference.

By following these guidelines, you can ensure reliable and efficient operation of the N82S135N.

(For reference only)