Details

---

BUY OP184FS https://www.utsource.net/itm/p/11658389.html

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Supply Voltage	VCC	2.7	-	5.5	V	-
Quiescent Current	IQ	-	10	-	渭A	At VCC = 3V, TA = 25掳C
Input Offset Voltage	VOS	-	100	-	渭V	At VCC = 3V, TA = 25掳C
Input Bias Current	IB	-	10	-	pA	At VCC = 3V, TA = 25掳C
Input Voltage Range	VIN	0	-	VCC - 1.5	V	-
Output Voltage Swing	VOUT	0	-	VCC - 1.5	V	-
Bandwidth	fBW	-	1.1	-	MHz	At VCC = 3V, TA = 25掳C, G = +1
Slew Rate	SR	-	0.6	-	V/渭s	At VCC = 3V, TA = 25掳C
Common-Mode Rejection Ratio	CMRR	80	-	-	dB	At VCC = 3V, TA = 25掳C, f = 1kHz
Power Supply Rejection Ratio	PSRR	80	-	-	dB	At VCC = 3V, TA = 25掳C, f = 1kHz
Operating Temperature	TA	-40	-	125	掳C	-

Instructions for Use:

1. Supply Voltage: The OP184FS operates with a supply voltage ranging from 2.7V to 5.5V. Ensure that the supply voltage is within this range to avoid damage to the device.
2. Quiescent Current: The typical quiescent current is 10渭A at 3V supply voltage and 25掳C ambient temperature. This value helps in power budgeting for low-power applications.
3. Input Offset Voltage: The input offset voltage is typically 100渭V at 3V supply voltage and 25掳C ambient temperature. This parameter affects the accuracy of the amplifier in precision applications.
4. Input Bias Current: The input bias current is typically 10pA at 3V supply voltage and 25掳C ambient temperature. Low bias current ensures minimal loading on the input signal source.
5. Input Voltage Range: The input voltage range extends from 0V to V_CC - 1.5V. Ensure that the input signals do not exceed these limits to prevent distortion or damage.
6. Output Voltage Swing: The output voltage swing is from 0V to V_CC - 1.5V. This range should be considered when designing the load circuitry.
7. Bandwidth: The bandwidth is typically 1.1MHz at a gain of +1 and a 3V supply voltage. Higher gains will reduce the bandwidth.
8. Slew Rate: The slew rate is typically 0.6V/渭s at a 3V supply voltage. This parameter is important for high-frequency and large-signal applications.
9. Common-Mode Rejection Ratio (CMRR): The CMRR is 80dB at 1kHz and a 3V supply voltage. High CMRR indicates good rejection of common-mode noise.
10. Power Supply Rejection Ratio (PSRR): The PSRR is 80dB at 1kHz and a 3V supply voltage. High PSRR ensures that variations in the supply voltage do not affect the output.
11. Operating Temperature: The operating temperature range is from -40掳C to 125掳C. Ensure that the device is used within this range to maintain performance and reliability.

Additional Notes:

• Always ensure proper decoupling capacitors are placed close to the power supply pins to filter out any noise.
• For optimal performance, use a stable and clean power supply.
• When handling the OP184FS, follow ESD (Electrostatic Discharge) precautions to avoid damage to the device.

(For reference only)