Details

---

BUY PIC17C756A-33/L https://www.utsource.net/itm/p/11658790.html

Parameter	Description	Value
Device	Microcontroller	PIC17C756A-33/L
Package Type	Package type	40-Pin DIP
Operating Voltage	Range of supply voltage that the device can operate within	2.5V to 5.5V
Clock Speed	Maximum frequency at which the microcontroller can execute instructions	33 MHz
Program Memory Size	Size of the program memory	8K x 14 Flash
Data Memory Size	Size of the data memory (RAM)	368 Bytes
EEPROM Data Memory	Size of EEPROM memory	256 Bytes
I/O Pins	Number of input/output pins	33
Timers	Number and type of timers	2 x 8-bit, 1 x 16-bit
Analog-to-Digital	Number of A/D channels	8
Communication Interfaces	Supported communication protocols	SPI, I2C, UART
Interrupt Sources	Number of interrupt sources	12
Watchdog Timer	Presence of watchdog timer	Yes
Power Consumption	Typical power consumption in active mode	2 mA @ 4 MHz, 3V
Temperature Range	Operating temperature range	-40°C to +85°C

Instructions for Use:

1. Power Supply:

   • Ensure the operating voltage is within the specified range (2.5V to 5.5V).

2. Clock Configuration:

   • Configure the clock source according to your application needs, supporting up to 33 MHz.

3. Memory Management:

   • Utilize the 8K x 14 Flash program memory for storing your firmware.
   • Use the 368 bytes of RAM for variable storage during runtime.
   • Store critical non-volatile data in the 256-byte EEPROM.

4. I/O Operations:

   • Configure the I/O pins as needed using the internal pull-up resistors and tri-state buffers.
   • Handle analog inputs through the 8-channel A/D converter.

5. Peripheral Setup:

   • Initialize timers and communication interfaces (SPI, I2C, UART) as required by your application.
   • Set up interrupts for efficient event handling.

6. Power Management:

   • Implement low-power modes such as SLEEP to reduce power consumption when not actively processing.

7. Programming:

   • Program the device using a suitable programmer compatible with the PIC17C series.
   • Follow the manufacturer’s guidelines for code loading and verification.

8. Environmental Considerations:

   • Operate the device within the specified temperature range (-40°C to +85°C) for reliable performance.

For detailed programming and specific configuration settings, refer to the official datasheet provided by Microchip Technology Inc.

(For reference only)