Details

---

BUY POWR607-01SN32I https://www.utsource.net/itm/p/11658895.html

Parameter	Description	Value	Unit
Part Number	Device Identifier	POWR607-01SN32I	-
Package Type	Package Style	WLCSP (Wafer Level CSP)	-
Number of Pins	Number of Electrical Connections	32	-
Operating Voltage	Supply Voltage Range	1.8 to 5.5	V
Operating Temperature	Temperature Range for Operation	-40 to 125	掳C
Storage Temperature	Temperature Range for Storage	-65 to 150	掳C
Quiescent Current	Current Consumption in Standby Mode	10	渭A
Output Current	Maximum Continuous Output Current	3	A
Dropout Voltage	Minimum Input-to-Output Voltage Difference	0.3	V
Load Regulation	Change in Output Voltage with Load Change	卤1	%
Line Regulation	Change in Output Voltage with Input Change	卤0.5	%
PSRR (Power Supply Rejection Ratio)	Ability to Reject Input Ripple	70	dB
Transient Response	Response to Sudden Changes in Load	50	渭s
ESD Rating	Electrostatic Discharge Tolerance	HBM: 2000, MM: 200	V

Instructions:

1. Mounting and Handling:

   • Handle the device with care to avoid damage to the pins and package.
   • Use appropriate ESD protection measures during handling and assembly.

2. Soldering:

   • Use a soldering iron with a temperature not exceeding 260掳C.
   • Ensure the soldering time does not exceed 10 seconds per pin.
   • Allow the device to cool down naturally after soldering.

3. Powering Up:

   • Ensure the input voltage is within the specified operating range (1.8V to 5.5V).
   • Connect the output capacitor as close as possible to the device to ensure stability.
   • Gradually increase the input voltage to avoid inrush current issues.

4. Thermal Management:

   • Provide adequate heat sinking if the device will operate at high output currents.
   • Ensure the ambient temperature does not exceed the maximum operating temperature of 125掳C.

5. Testing:

   • Verify the output voltage and current using a multimeter.
   • Check for any abnormal heating or unusual behavior during operation.
   • Perform load testing to ensure the device meets the required performance specifications.

6. Storage:

   • Store the device in a dry, cool place away from direct sunlight.
   • Keep the device in its original packaging until ready for use to protect against ESD and physical damage.

7. Troubleshooting:

   • If the device does not function as expected, check for proper connections and correct power supply voltages.
   • Verify that the input and output capacitors are correctly placed and rated.
   • Consult the datasheet or contact the manufacturer for further assistance.

(For reference only)