Details

---

BUY RA8835P4N https://www.utsource.net/itm/p/11659093.html

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (VDD)	Operating supply voltage	2.7	-	3.6	V
Standby Supply Voltage (VDD)	Standby supply voltage	2.7	-	3.6	V
Logic Input Voltage (VIL)	Low-level input voltage	0.0	-	0.8	V
Logic Output Voltage (VIH)	High-level input voltage	2.0	-	VDD	V
Logic Output Voltage (VOL)	Low-level output voltage	0.0	-	0.4	V
Logic Output Voltage (VOH)	High-level output voltage	VDD - 0.4	-	VDD	V
Operating Temperature (TA)	Ambient operating temperature	-40	-	85	掳C
Storage Temperature (TSTG)	Storage temperature range	-65	-	150	掳C
Maximum Junction Temperature (TJ)	Maximum junction temperature	-	-	125	掳C
ESD Rating (HBM)	Human Body Model ESD rating	-	-	2000	V
ESD Rating (MM)	Machine Model ESD rating	-	-	200	V

Instructions for Using the RA8835P4N:

1. Power Supply:

   • Ensure that the supply voltage (VDD) is within the specified range of 2.7V to 3.6V.
   • Use a stable power source to avoid fluctuations that could affect performance.

2. Logic Levels:

   • The logic input levels (VIL and VIH) must be within the specified ranges to ensure proper operation.
   • The logic output levels (VOL and VOH) should be monitored to ensure they meet the required standards.

3. Temperature Considerations:

   • Operate the device within the ambient temperature range of -40掳C to 85掳C.
   • Store the device within the storage temperature range of -65掳C to 150掳C.
   • Do not exceed the maximum junction temperature of 125掳C during operation.

4. ESD Protection:

   • Handle the device with care to avoid damage from electrostatic discharge (ESD).
   • Follow proper ESD handling procedures, such as using grounded wrist straps and anti-static mats.

5. Pin Configuration:

   • Refer to the pin configuration diagram provided in the datasheet to correctly connect the device.
   • Ensure all pins are connected properly to avoid damage or malfunction.

6. Initialization:

   • Follow the initialization sequence outlined in the datasheet to configure the device correctly.
   • Use the appropriate commands and registers to set up the desired functionality.

7. Programming:

   • Use the provided software libraries or example code to facilitate programming and communication with the device.
   • Refer to the programming guide for detailed instructions on using specific features and functions.

8. Testing:

   • Perform functional tests to verify the correct operation of the device.
   • Use test vectors and diagnostic routines to identify and resolve any issues.

9. Documentation:

   • Always refer to the latest version of the datasheet and application notes for the most accurate and up-to-date information.
   • Keep documentation readily available for reference during design and troubleshooting.

(For reference only)