Details

---

BUY RTL8111E-VC-CG https://www.utsource.net/itm/p/11659341.html

Parameter	Description	Value
Part Number	Component Identifier	RTL8111E-VC-CG
Package Type	Encapsulation	64-Pin QFN
Operating Temperature	Range of temperatures where the device can operate reliably	-40°C to 85°C
Supply Voltage	Input voltage range	3.3V ± 5%
Data Rate	Maximum data transfer rate	1 Gbps
Interface	Physical layer interface	PCI Express (PCIe)
MAC Address	Unique identifier for network interfaces	6-byte (48-bit)
Wake-on-LAN	Power management feature	Supported
Jumbo Frame Support	Maximum frame size support	Up to 9,000 bytes
Checksum Offload	Hardware offloading of checksum calculations	Supported
Interrupt Moderation	Reduces the number of interrupts by batching them	Supported
Transmit/Receive Queues	Number of queues for data transmission and reception	Multiple
LED Indicators	Visual indicators for status and activity	Link, Activity, Speed
RoHS Compliance	Compliance with Restriction of Hazardous Substances Directive	Yes

Instructions for Use

1. Power Supply:

   • Ensure that the supply voltage is within the specified range (3.3V ± 5%).
   • Connect the power supply to the appropriate pins on the PCB.

2. Installation:

   • Insert the RTL8111E-VC-CG into the designated slot on the motherboard.
   • Secure the component using the provided mounting hardware.

3. Configuration:

   • Use the BIOS or system configuration utility to enable the network adapter.
   • Assign a static IP address or configure DHCP for automatic IP assignment.

4. Driver Installation:

   • Download the latest drivers from the Realtek website.
   • Install the drivers following the provided installation guide.

5. Firmware Update:

   • Check for firmware updates regularly to ensure optimal performance and security.
   • Follow the manufacturer’s instructions for updating the firmware.

6. Troubleshooting:

   • If the network connection is not working, check the LED indicators for any issues.
   • Verify that the cable and network infrastructure are functioning correctly.
   • Use diagnostic tools to identify and resolve any configuration issues.

7. Maintenance:

   • Keep the component and surrounding area clean to prevent dust buildup.
   • Avoid exposing the component to extreme temperatures or humidity.

8. Disposal:

   • Dispose of the component in accordance with local environmental regulations.
   • Consider recycling options for electronic components.

(For reference only)