Details

---

BUY S558-5999-T5-F https://www.utsource.net/itm/p/11659456.html

Parameter	Description
Part Number	S558-5999-T5-F
Type	Surface Mount Inductor
Inductance	5.6 μH
Tolerance	±20%
Rated Current (Irms)	1.8 A
Saturation Current	3.6 A (ΔL=30%)
DC Resistance (Rdc)	0.07 Ω
Self-Resonant Frequency (SRF)	25 MHz
Operating Temperature	-40°C to +125°C
Package Size	0805 [2.0 x 2.0 mm]
Termination	SnPb (63/37)
RoHS Compliance	Non-RoHS
Mounting Type	Surface Mount

Instructions:

1. Handling and Storage:

   • Store in a dry, cool place.
   • Avoid exposure to high humidity and extreme temperatures.
   • Handle with care to prevent damage to the component.

2. Soldering:

   • Use a soldering iron with a temperature setting of 350°C (662°F) for SnPb termination.
   • Ensure the soldering time does not exceed 10 seconds.
   • Allow the component to cool naturally after soldering.

3. Placement:

   • Place the component on the PCB with the correct orientation.
   • Ensure the component is aligned with the PCB pads.
   • Use a reflow soldering process if applicable.

4. Inspection:

   • Visually inspect the solder joints for proper wetting and absence of voids or bridges.
   • Use a multimeter to check for continuity and resistance values.

5. Testing:

   • Measure the inductance using an LCR meter to ensure it falls within the specified tolerance.
   • Test the rated current and saturation current to verify performance.

6. Safety:

   • Follow all safety guidelines when handling and testing electronic components.
   • Use appropriate personal protective equipment (PPE) as needed.

(For reference only)