Details

---

BUY SPF0001 https://www.utsource.net/itm/p/11660010.html

Parameter	Description	Value
Part Number	Component Identifier	SPF0001
Type	Type of Component	Surface Mount
Package	Package Type	SOT-23
Function	Primary Function	Voltage Regulator
Input Voltage	Range of Input Voltage	2.7V to 5.5V
Output Voltage	Fixed Output Voltage	3.3V
Output Current	Maximum Continuous Output Current	150mA
Quiescent Current	Current Consumption in Operation	20渭A
Dropout Voltage	Minimum Input-Output Voltage Difference for Regulation	150mV
Operating Temperature	Range of Operating Temperatures	-40掳C to 85掳C
Storage Temperature	Range of Storage Temperatures	-65掳C to 150掳C
PSRR (Power Supply Rejection Ratio)	At 1kHz	70dB
Thermal Resistance (胃JA)	Junction to Ambient Thermal Resistance	150掳C/W

Instructions for Use

1. Mounting:

   • Ensure the PCB layout follows the recommended guidelines to minimize noise and improve thermal performance.
   • Place the component on the PCB with the correct orientation, ensuring that the pin 1 marker aligns with the PCB silkscreen.

2. Soldering:

   • Use a soldering iron or reflow oven with a temperature profile suitable for the SOT-23 package.
   • Avoid excessive heat to prevent damage to the component.

3. Input and Output Capacitors:

   • Connect a 1渭F ceramic capacitor between the input and ground pins as close to the device as possible.
   • Connect a 1渭F ceramic capacitor between the output and ground pins to stabilize the output voltage.

4. Heat Dissipation:

   • For applications requiring high output current, ensure adequate PCB copper area for heat dissipation.
   • Consider adding a heatsink if the thermal resistance needs to be reduced further.

5. Testing:

   • Verify the input and output voltages using a multimeter to ensure the regulator is functioning correctly.
   • Check the quiescent current to ensure it meets the specified value.

6. Storage:

   • Store the components in a dry, cool place to avoid moisture damage.
   • Follow ESD (Electrostatic Discharge) precautions to prevent damage during handling.

(For reference only)