Details

---

BUY TCA0372DM2ELG https://www.utsource.net/itm/p/11660314.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD		1.65		3.6	V
Output Low Voltage	VOL	IO = 8 mA, VDD = 3.3V	0.1			V
Output High Voltage	VOH	IO = -2 mA, VDD = 3.3V			3.2	V
Input Leakage Current	IIL	VCC = 3.3V	-1		1	渭A
Propagation Delay Time	tpd	VDD = 3.3V, TA = 25掳C	5		7	ns
Power Dissipation	PD	All outputs high			90	mW

Instructions for TCA0372DM2ELG:

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the range of 1.65V to 3.6V.

2. Output Configuration:

   • When configuring output states, note that the output low voltage (VOL) should not exceed 0.1V when sourcing 8mA.
   • For output high voltage (VOH), ensure it remains below 3.2V when sinking -2mA.

3. Input Handling:

   • Be aware of the input leakage current (IIL), which can be between -1渭A and 1渭A at a supply voltage of 3.3V.

4. Timing Considerations:

   • Account for the propagation delay time (tpd) of 5 to 7 nanoseconds under typical operating conditions.

5. Power Management:

   • Monitor power dissipation; it should not exceed 90mW when all outputs are in a high state.

6. Operating Temperature:

   • The device is typically rated for operation over a temperature range specified by the manufacturer, usually from -40掳C to +85掳C unless otherwise noted.

7. Handling and Storage:

   • Follow standard ESD precautions to avoid damage during handling.
   • Store in recommended conditions to prevent moisture-related issues.

8. Application Notes:

   • Refer to the datasheet for detailed application circuits and recommendations specific to your use case.

(For reference only)