Details

---

BUY TLE6214L https://www.utsource.net/itm/p/11660432.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions/Notes
Supply Voltage	VCC	4.5	5.0	5.5	V	Operating range for the device
Quiescent Current	IQ	-	15	-	mA	Typical current consumption at VCC = 5V, TA = 25掳C
Output Current (Sink)	IOL	-	300	-	mA	Per output, at VCC = 5V, TA = 25掳C
Output Current (Source)	IOH	-	100	-	mA	Per output, at VCC = 5V, TA = 25掳C
Output Voltage Drop	VOL	-	0.8	-	V	When sinking 300mA, VCC = 5V, TA = 25掳C
Output Voltage Drop	VOH	-	4.2	-	V	When sourcing 100mA, VCC = 5V, TA = 25掳C
Input Voltage	VIH	2.0	-	5.5	V	High-level input voltage
Input Voltage	VIL	0	-	0.8	V	Low-level input voltage
Operating Temperature	TA	-40	-	125	掳C	Ambient temperature range
Storage Temperature	TSTG	-65	-	150	掳C	Temperature range for storage

Instructions for Using TLE6214L

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the specified range of 4.5V to 5.5V.
   • Use a stable power supply to avoid fluctuations that can affect the performance of the device.

2. Input Signals:

   • Apply high-level input voltages (V_IH) between 2.0V and 5.5V.
   • Apply low-level input voltages (V_IL) between 0V and 0.8V.
   • Ensure input signals are clean and free from noise to prevent incorrect operation.

3. Output Current:

   • The device can sink up to 300mA per output and source up to 100mA per output.
   • Do not exceed these current limits to avoid damaging the device.

4. Thermal Management:

   • Operate the device within the ambient temperature range of -40掳C to 125掳C.
   • If operating in high-temperature environments, ensure adequate heat dissipation to prevent overheating.

5. Storage:

   • Store the device in a temperature range of -65掳C to 150掳C to ensure long-term reliability.

6. Handling:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Follow proper ESD (Electrostatic Discharge) precautions during handling and installation.

7. Testing:

   • Before integrating the device into a circuit, test it under controlled conditions to ensure it meets the specified parameters.
   • Use a multimeter to verify the supply voltage and output currents.

8. Layout Considerations:

   • Place the device close to the load to minimize the length of the wiring, reducing the risk of voltage drops and interference.
   • Use decoupling capacitors near the power supply pins to filter out noise and provide stable operation.

By following these guidelines, you can ensure reliable and efficient operation of the TLE6214L in your application.

(For reference only)