Details

---

BUY TPV002AMS https://www.utsource.net/itm/p/11660634.html

Parameter	Symbol	Conditions	Min	Typical	Max	Unit
Supply Voltage	VDD	-	1.6	-	5.5	V
Output Current	IOUT	-	-	50	100	mA
Quiescent Current	IQ	VDD = 3V, no load	-	10	20	渭A
Dropout Voltage	VDROPOUT	IOUT = 100mA	-	250	400	mV
Operating Temperature	Toper	-	-40	-	85	掳C
Storage Temperature	Tstg	-	-65	-	150	掳C
Thermal Resistance	胃JA	-	-	120	-	掳C/W

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the range of 1.6V to 5.5V.
   • Connect the power supply to the VDD pin and ground to the GND pin.

2. Output Load:

   • The maximum output current (IOUT) is 100mA. Ensure the load does not exceed this limit to avoid damage.
   • For optimal performance, keep the load current around 50mA.

3. Quiescent Current:

   • The quiescent current (IQ) is typically 10渭A at 3V with no load. This value can increase slightly under different operating conditions.

4. Dropout Voltage:

   • The dropout voltage (VDROPOUT) is typically 250mV at 100mA output current. Ensure the input voltage is at least 250mV higher than the desired output voltage to maintain regulation.

5. Temperature Considerations:

   • The operating temperature range is from -40掳C to 85掳C. Avoid operating the device outside this range to prevent thermal stress.
   • The storage temperature range is from -65掳C to 150掳C. Store the device in a controlled environment to ensure long-term reliability.

6. Thermal Management:

   • The thermal resistance (胃JA) is typically 120掳C/W. Use appropriate heat sinking or cooling methods if the device will be operating at high power levels or in high ambient temperatures.

7. Mounting and Handling:

   • Handle the device with care to avoid static discharge and physical damage.
   • Follow standard surface mount technology (SMT) procedures for mounting the device on a PCB.

8. Testing:

   • Before final assembly, test the device under typical operating conditions to ensure it meets the specified parameters.
   • Use a multimeter to verify the output voltage and current.

9. Safety:

   • Ensure proper grounding and isolation to prevent electrical hazards.
   • Follow all relevant safety standards and regulations when designing circuits that include the TPV002AMS.

(For reference only)