Details
BUY W25Q256JVFIQ https://www.utsource.net/itm/p/11660966.html
| Parameter | Symbol | Min | Typ | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 2.7 | - | 3.6 | V | |
| Operating Temperature | Toper | -40 | - | 85 | 掳C | |
| Storage Temperature | Tstg | -40 | - | 85 | 掳C | |
| Standby Current (Active) | IccA | - | 1 | 2 | 渭A | |
| Standby Current (Idle) | IccI | - | 0.1 | 0.5 | 渭A | |
| Programming Current | Ipp | - | 2 | 4 | mA | |
| Read Current | Irr | - | 2 | 4 | mA | |
| Page Program Time | tPP | - | 2 | 5 | ms | |
| Sector Erase Time | tSE | - | 150 | 300 | ms | |
| Block Erase Time | tBE | - | 300 | 600 | ms | |
| Chip Erase Time | tCE | - | 3 | 6 | s | |
| Data Retention | - | - | - | 20 | years | |
| Endurance Cycles (Sector) | - | - | - | 100 | k cycles |
Instructions for W25Q256JVFIQ
Power Supply:
- Ensure the supply voltage (VCC) is within the range of 2.7V to 3.6V.
- The device can operate over a temperature range of -40掳C to 85掳C.
Standby Modes:
- Active Standby Current (IccA): Typically 1 渭A, with a maximum of 2 渭A.
- Idle Standby Current (IccI): Typically 0.1 渭A, with a maximum of 0.5 渭A.
Programming and Erasing:
- Programming Current (Ipp): Typically 2 mA, with a maximum of 4 mA.
- Read Current (Irr): Typically 2 mA, with a maximum of 4 mA.
- Page Program Time (tPP): Typically 2 ms, with a maximum of 5 ms.
- Sector Erase Time (tSE): Typically 150 ms, with a maximum of 300 ms.
- Block Erase Time (tBE): Typically 300 ms, with a maximum of 600 ms.
- Chip Erase Time (tCE): Typically 3 seconds, with a maximum of 6 seconds.
Data Retention and Endurance:
- Data retention is up to 20 years.
- Endurance cycles for sector erase are up to 100,000 cycles.
Pin Configuration:
- Refer to the datasheet for detailed pin configuration and functions.
Command Set:
- Use the standard SPI command set for read, write, and erase operations.
- Refer to the datasheet for specific command codes and sequences.
Handling and Storage:
- Store the device in a temperature range of -40掳C to 85掳C.
- Handle with care to avoid electrostatic discharge (ESD).
For more detailed information, refer to the official W25Q256JVFIQ datasheet.
(For reference only)View more about W25Q256JVFIQ on main site
