Details

---

BUY D15XB60 15A 600V https://www.utsource.net/itm/p/11661511.html

Parameter	Value	Unit
Part Number	D15XB60	-
Maximum Repetitive Peak Reverse Voltage (VRRM)	600	V
Maximum RMS Voltage (VRMS)	424	V
Maximum DC Blocking Voltage (VDC)	600	V
Average Rectified Output Current (IO)	15	A
Non-Repetitive Peak Surge Current (IFSM)	200	A
Junction Operating Temperature (TJ)	-55 to 175	°C
Storage Temperature (TS)	-55 to 150	°C
Case Style	DO-204AA	-

Instructions for Use:

1. Mounting:

   • Ensure proper heat dissipation by mounting the diode on a heatsink if operating at high currents.
   • Use thermal paste between the diode and heatsink to improve thermal conductivity.

2. Electrical Connections:

   • Connect the anode to the positive side of the circuit and the cathode to the negative side.
   • Ensure that the voltage applied does not exceed the maximum ratings specified.

3. Handling:

   • Handle the diode with care to avoid mechanical damage.
   • Avoid exposing the diode to excessive static electricity, which can damage the internal structure.

4. Storage:

   • Store the diode in a dry, cool place away from direct sunlight and corrosive substances.
   • Keep the diode in its original packaging until ready for use to prevent damage.

5. Testing:

   • Before installation, test the diode using a multimeter to ensure it is functioning correctly.
   • Check for continuity between the anode and cathode; there should be no continuity when reverse-biased.

6. Operating Conditions:

   • Operate the diode within the specified temperature range to ensure reliable performance.
   • Monitor the temperature of the diode during operation to prevent overheating.

7. Surge Current:

   • Be aware of the non-repetitive peak surge current rating (IFSM) and ensure that any transient currents do not exceed this value to avoid damage.

8. Compliance:

   • Ensure that the diode complies with all relevant safety and regulatory standards for your application.

(For reference only)