Details

---

BUY LM35DT/NOPB https://www.utsource.net/itm/p/11667171.html

Parameter	Symbol	Conditions	Min	Typical	Max	Unit
Supply Voltage	VCC	Operating Range	4.5	-	30	V
Output Voltage at 0掳C	VO(0掳C)	VCC = 5V	0	0.1	0.2	V
Sensitivity	S	VCC = 5V	9.0	10	11	mV/掳C
Linearity	-	Full Scale Range	-	卤0.25	-	掳C
Impedance	ZO	VCC = 5V, f = 1kHz	600	-	-	惟
Quiescent Current	IQ	VCC = 5V	50	70	90	渭A
Operating Temperature	TA	-	-55	-	150	掳C
Storage Temperature	TS	-	-65	-	150	掳C

Instructions for Using LM35DT/NOPB

1. Power Supply:

   • The LM35DT/NOPB can operate over a wide range of supply voltages from 4.5V to 30V.
   • Ensure the supply voltage is stable and within the specified range to avoid damage or inaccurate readings.

2. Output Connection:

   • Connect the output pin (pin 2) to your measurement circuit or ADC input.
   • The output voltage is directly proportional to the temperature in Celsius, with a sensitivity of 10mV/掳C.

3. Grounding:

   • Connect the ground pin (pin 3) to the system ground to ensure accurate measurements.
   • Proper grounding is crucial to minimize noise and interference.

4. Supply Voltage Connection:

   • Connect the supply voltage pin (pin 1) to the positive terminal of your power supply.

5. Temperature Measurement:

   • The sensor provides a linear output voltage that increases by 10mV for every degree Celsius increase in temperature.
   • To calculate the temperature, use the formula: [ text{Temperature (掳C)} = frac{text{Output Voltage (V)}}{10 text{ mV/掳C}} ]

6. Calibration:

   • For high-precision applications, calibrate the sensor using a known temperature reference.
   • Measure the output voltage at a known temperature and adjust your system accordingly.

7. Mounting:

   • Mount the sensor in a location where it will accurately measure the desired temperature.
   • Avoid placing it near heat sources or in direct sunlight, as this can affect the accuracy of the readings.

8. Storage and Handling:

   • Store the sensor in a dry, cool place when not in use.
   • Handle the sensor with care to avoid damaging the pins or the internal components.

9. Operating Temperature Range:

   • The sensor is designed to operate over a wide temperature range from -55掳C to 150掳C.
   • Ensure the ambient temperature is within this range to maintain accurate and reliable performance.

10. Storage Temperature Range:

    • The sensor can be stored at temperatures ranging from -65掳C to 150掳C without damage.

By following these instructions, you can ensure optimal performance and longevity of the LM35DT/NOPB temperature sensor.

(For reference only)