Details

---

BUY 74VCX00MTCX https://www.utsource.net/itm/p/11683448.html
IC GATE NAND 4CH 2-INP 14TSSOP

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Supply Voltage	VCC	1.2	-	3.6	V	-
Input Low Voltage	VIL	-	0.2	0.8	V	VCC = 1.8V
Input High Voltage	VIH	1.0	1.6	-	V	VCC = 1.8V
Output Low Voltage	VOL	-	0.1	0.4	V	IOL = 4mA, VCC = 1.8V
Output High Voltage	VOH	1.4	1.7	-	V	IOH = -4mA, VCC = 1.8V
Propagation Delay Time	tpd	-	2.5	4.5	ns	VCC = 1.8V, TA = 25°C
Power Consumption	PTOTAL	-	1.0	-	mW	VCC = 1.8V, f = 100MHz, TA = 25°C
Operating Temperature	TOP	-40	-	125	°C	-
Storage Temperature	TSTG	-65	-	150	°C	-

Instructions for Use:

1. Supply Voltage (V_CC):

   • Ensure the supply voltage is within the range of 1.2V to 3.6V.
   • Use a stable power source to avoid fluctuations that could affect performance.

2. Input Voltage Levels:

   • For reliable operation, input voltages should be within the specified ranges for V_IL and V_IH.
   • Avoid input voltages outside these ranges to prevent incorrect logic levels or damage to the device.

3. Output Voltage Levels:

   • The output low voltage (V_OL) and output high voltage (V_OH) should be within the specified limits to ensure proper logic levels.
   • Ensure the load connected to the outputs does not exceed the maximum current ratings.

4. Propagation Delay Time:

   • The propagation delay time (t_pd) is crucial for timing considerations in digital circuits.
   • Use this value to calculate the overall delay in your circuit.

5. Power Consumption:

   • The power consumption (P_TOTAL) is important for thermal management.
   • Ensure adequate heat dissipation if operating at higher frequencies or in high-temperature environments.

6. Operating and Storage Temperature:

   • The device is designed to operate within the temperature range of -40°C to 125°C.
   • Store the device in a temperature-controlled environment between -65°C and 150°C to maintain reliability.

7. Handling and Installation:

   • Handle the device with care to avoid static discharge and physical damage.
   • Follow standard soldering and mounting procedures to ensure reliable connections.

8. Testing and Verification:

   • After installation, verify the functionality of the device by testing its inputs and outputs under various conditions.
   • Use a logic analyzer or oscilloscope to monitor signal integrity and timing.

By following these guidelines, you can ensure optimal performance and reliability of the 74VCX00MTCX component in your application.

(For reference only)