Details

---

BUY SN74F258N https://www.utsource.net/itm/p/11693434.html
IC SELECTOR MUX QUAD 2-1 16-DIP

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VCC	4.75	5.0	5.25	V	-
Output High Voltage	VOH	-	2.4	3.5	V	IO = -0.4 mA, VCC = 5V
Output Low Voltage	VOL	0.0	0.4	0.5	V	IO = 8.0 mA, VCC = 5V
Input High Voltage	VIH	2.0	-	VCC	V	II = -1.0 μA
Input Low Voltage	VIL	0.0	-	0.8	V	II = 1.0 μA
Propagation Delay Time	tpd	6.0	9.0	12.0	ns	VCC = 5V, TA = 25°C
Power Dissipation	PD	-	100	-	mW	Per package
Operating Temperature	TA	-55	-	125	°C	-
Storage Temperature	TSTG	-65	-	150	°C	-

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the specified range of 4.75V to 5.25V.
   • Connect the ground (GND) pin to a stable reference point.

2. Input Signals:

   • Apply input signals (VIH and VIL) that meet the minimum and maximum voltage levels to ensure proper operation.
   • Avoid exceeding the maximum input current ratings.

3. Output Signals:

   • Ensure that the output loads do not exceed the maximum current ratings (I_O).
   • Use appropriate pull-up or pull-down resistors if necessary to maintain stable output levels.

4. Propagation Delay:

   • Consider the propagation delay time (t_pd) in your timing calculations to ensure reliable data transfer.

5. Temperature:

   • Operate the device within the specified operating temperature range to avoid damage.
   • Store the device within the storage temperature range when not in use.

6. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal circuits.
   • Follow standard ESD (Electrostatic Discharge) precautions during handling and installation.

7. Mounting:

   • Ensure proper mounting on the PCB to maintain good thermal and electrical connections.
   • Follow the recommended PCB layout guidelines for optimal performance.

By adhering to these parameters and instructions, you can ensure reliable and efficient operation of the SN74F258N.

(For reference only)