Details

---

BUY OPA2340UA/2K5 https://www.utsource.net/itm/p/11698599.html
IC OPAMP GP 2 CIRCUIT 8SOIC

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	-	2.7	-	5.5	V
Quiescent Current	IQ	VCC = 5V	-	10	-	渭A
Input Offset Voltage	VOS	VCC = 5V	-	10	60	渭V
Input Bias Current	IB	VCC = 5V	-	0.5	2	pA
Input Voltage Range	VIN	VCC = 5V	0	-	5	V
Output Voltage Swing	VOUT	VCC = 5V, RL=2k惟	0.1	-	4.9	V
Slew Rate	SR	VCC = 5V	-	0.5	-	V/渭s
Gain Bandwidth Product	GBP	VCC = 5V	-	1.8	-	MHz
Common Mode Rejection Ratio	CMRR	VCC = 5V	-	100	-	dB
Power Supply Rejection Ratio	PSRR	VCC = 5V	-	100	-	dB

Instructions for Using OPA2340UA/2K5:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 2.7V to 5.5V.
   • Connect the positive supply to V_CC and the negative supply to GND.

2. Input Connections:

   • The input signals should be within the input voltage range (0V to 5V for a 5V supply).
   • Connect the non-inverting input (pin 3) and inverting input (pin 2) as required by your circuit.

3. Output Connections:

   • The output voltage swing is from 0.1V to 4.9V for a 5V supply with a 2k惟 load.
   • Connect the output (pin 1) to your load or next stage of the circuit.

4. Biasing and Feedback:

   • Use appropriate biasing resistors to set the operating point of the op-amp.
   • For stability and desired gain, use feedback resistors to create a closed-loop configuration.

5. Thermal Considerations:

   • Ensure proper heat dissipation if the op-amp is used in high-power applications.
   • Avoid exceeding the maximum power dissipation rating of the device.

6. Storage and Handling:

   • Store the device in a dry, static-free environment.
   • Handle with care to avoid damage to the pins and internal components.

7. Testing:

   • Before integrating the op-amp into a larger system, test it in a simple circuit to ensure it meets the expected performance parameters.

8. Safety:

   • Follow all safety guidelines and regulations when working with electrical circuits.
   • Use appropriate protective equipment to prevent electrical shock and injury.

(For reference only)