Details

---

BUY SN65HVD235D https://www.utsource.net/itm/p/11699086.html
IC TRANSCEIVER HALF 1/1 8SOIC

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	-	4.75	5.0	5.25	V
Output Low Voltage	VOL	IL = 16 mA, VCC = 5V	0.4	-	-	V
Output High Voltage	VOH	IH = -4 mA, VCC = 5V	-	-	4.5	V
Differential Output Voltage	VOD	-	1.0	-	-	V
Common-Mode Output Voltage	VOCM	-	2.5	-	-	V
Input High Voltage	VIH	-	2.0	-	-	V
Input Low Voltage	VIL	-	-	-	0.8	V
Input Current	II	-	-1	0	1	μA
Propagation Delay	tpd	-	-	45	-	ns
Skew	tskew	-	-	15	-	ns
Operating Temperature Range	TA	-	-40	-	125	°C
Storage Temperature Range	TSTG	-	-65	-	150	°C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the specified range of 4.75V to 5.25V.
   • Connect the ground (GND) pin to the system ground.

2. Signal Levels:

   • The input signals should be within the specified input high (V_IH) and input low (V_IL) voltage levels.
   • The output signals will be within the specified output high (V_OH) and output low (V_OL) voltage levels.

3. Differential Signaling:

   • The differential output voltage (V_OD) should be at least 1.0V for proper operation.
   • The common-mode output voltage (V_OCM) should be around 2.5V.

4. Timing Parameters:

   • The propagation delay (t_pd) should not exceed 45ns.
   • The skew (t_skew) between the differential outputs should not exceed 15ns.

5. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to 125°C.
   • Store the device within the temperature range of -65°C to 150°C.

6. Handling:

   • Handle the device with care to avoid static damage.
   • Follow standard ESD (Electrostatic Discharge) precautions during handling and installation.

7. Layout and PCB Design:

   • Use short traces for differential pairs to minimize signal degradation.
   • Place decoupling capacitors close to the power pins to ensure stable operation.

8. Testing:

   • Verify the supply voltage and signal levels using a multimeter or oscilloscope.
   • Test the propagation delay and skew using a high-speed digital analyzer.

9. Compliance:

   • Ensure that the device meets all relevant industry standards and regulations for your application.

(For reference only)