Details

---

BUY OPA2251UA/2K5G4 https://www.utsource.net/itm/p/11700214.html
IC OPAMP GP 2 CIRCUIT 8SOIC

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Supply Voltage	VCC	2.7	-	5.5	V	-
Quiescent Current (Per Amplifier)	IQ	-	100	-	渭A	VCC = 5V, No Load
Input Offset Voltage	VOS	-	15	-	渭V	VCC = 5V, TA = 25掳C
Input Bias Current	IB	-	1	-	pA	VCC = 5V, TA = 25掳C
Input Voltage Range	VI	0	-	VCC - 1.2	V	-
Output Voltage Swing	VO	0.01	-	VCC - 0.01	V	RL = 10k惟, VCC = 5V
Slew Rate	SR	-	1.8	-	V/渭s	VCC = 5V, RL = 1k惟
Gain Bandwidth Product	GBW	-	1.6	-	MHz	VCC = 5V, RL = 1k惟
Common Mode Rejection Ratio	CMRR	90	-	110	dB	VCC = 5V, f = 1kHz
Power Supply Rejection Ratio	PSRR	90	-	110	dB	VCC = 5V, f = 1kHz
Operating Temperature Range	TA	-40	-	125	掳C	-

Instructions for Use:

1. Power Supply:

   • The OPA2251UA/2K5G4 can operate from a single supply voltage ranging from 2.7V to 5.5V.
   • Ensure that the power supply is stable and free from noise to avoid affecting the performance of the amplifier.

2. Input Signal:

   • The input voltage range should be between 0V and V_CC - 1.2V to avoid clipping or damage to the device.
   • Use appropriate input coupling capacitors if AC signals are being applied to the inputs.

3. Output Load:

   • The output can swing from 0.01V to V_CC - 0.01V when connected to a 10k惟 load.
   • For lower load resistances, ensure that the output does not exceed its maximum swing capabilities to prevent distortion.

4. Biasing:

   • The input bias current is very low (1pA typical), making it suitable for high-impedance sources.
   • Use biasing networks if necessary to ensure the inputs are at the desired DC level.

5. Temperature Considerations:

   • The operating temperature range is from -40掳C to 125掳C.
   • Ensure that the device is used within this range to maintain optimal performance and reliability.

6. Layout and Grounding:

   • Proper PCB layout is crucial for minimizing noise and ensuring stable operation.
   • Use a ground plane and keep signal traces short to reduce parasitic capacitance and inductance.

7. Stability:

   • The OPA2251UA/2K5G4 is unity-gain stable and can be used in both inverting and non-inverting configurations.
   • For higher gain applications, ensure that the feedback network is properly designed to maintain stability.

8. Storage and Handling:

   • Store the device in a dry environment to prevent moisture damage.
   • Handle with care to avoid static discharge, which can damage the sensitive internal components.

By following these guidelines, you can ensure optimal performance and longevity of the OPA2251UA/2K5G4 operational amplifier.

(For reference only)