Details

---

BUY ISO103 https://www.utsource.net/itm/p/11707896.html
IC OPAMP ISOLATION 1 CIRC 16CDIP

Parameter	Description
Part Number	ISO103
Type	Digital Isolator
Isolation Voltage	2500 Vrms (1 minute)
Operating Voltage	3.0 V to 5.5 V (VDD1, VDD2)
Data Rate	Up to 150 Mbps
Propagation Delay	24 ns (typical)
Power Consumption	8.5 mA (max) per channel at 5 V, 100 Mbps
Operating Temperature	-40掳C to +125掳C (ambient)
Package	8-pin SOIC (D)
Channels	3-channel (1 input, 2 outputs)
Features	- Reinforced isolation - Low power consumption - High data rate
Applications	- Industrial communication - Power supply control - Motor control

Instructions for Use

1. Power Supply Connections:

   • Connect VDD1 and VSS1 to the primary side power supply.
   • Connect VDD2 and VSS2 to the secondary side power supply.
   • Ensure that both power supplies are within the specified operating voltage range (3.0 V to 5.5 V).

2. Signal Connections:

   • Connect the input signal to the DIN pin.
   • Connect the output signals to the DOUT1 and DOUT2 pins.
   • The ISO103 isolates the input signal from the output signals, providing galvanic isolation.

3. Grounding:

   • Ensure that the ground connections (VSS1 and VSS2) are properly grounded to avoid noise and interference.

4. Temperature Considerations:

   • Operate the device within the specified temperature range (-40掳C to +125掳C) to ensure reliable performance.

5. Handling Precautions:

   • Handle the device with care to avoid damage to the pins and internal components.
   • Follow ESD (Electrostatic Discharge) precautions to prevent damage to the isolator.

6. Testing:

   • Test the device under typical operating conditions to verify proper functionality.
   • Use a multimeter or oscilloscope to measure the propagation delay and data rate.

7. Storage:

   • Store the device in a dry, cool place away from direct sunlight and sources of heat.

By following these instructions, you can ensure the reliable and efficient operation of the ISO103 digital isolator.

(For reference only)